Researchmap: https://researchmap.jp/read0008229/?lang=english, ORCID: 0000-0002-8121-5235
2024 (as of March 25, 2024)
ORIGINAL PAPERS
191) Tatsuya Tagawa, Mahiro Inada, Harunobu Nagino, Tadaharu Adachi: An exact three-dimensional elasticity analysis for out-of-plane free vibration of simply-supported rectangular plates on an elastic foundation. Journal of Structural Engineering, A Vol. 70A (2024) pp. 164-178. (https://doi.org/10.11532/structcivil.70A.164)
2023
ORIGINAL PAPERS
190) Mahiro INADA, Tatsuya TAGAWA, Harunobu NAGINO, Tadaharu ADACHI: Closed-form three-dimensional elasticity solution for out-of-plane free vibration of simply-supported elastic rectangular parallelepiped resting on Winkler foundation. Journal of Structures and Materials in Civil Engineering, Vol. 39 (2023) pp. 55-66. (https://doi.org/10.60345/kabse.39.0_55)
189) Tadaharu Adachi, Yuki Nakata: Novel measurement method for micro-impact testing based on electromagnetic phenomena. Proceedings of the 11th International Symposium on Impact Engineering, (2023), pp. 177-185.
188) Mervat Youssef, Eman H. El-Shenawy, Wael Khair-Eldeen, Tadaharu Adachi, Adel Nofal, Mohsen A. Hassan: The influences of Nb microalloying and grain refinement thermal cycling on microstructure and tribological properties of Armox 500T. Materials, Vol. 16 (2023), p. 7485 (16 pages). (https://doi.org/10.3390/ma16237485)
187) Mervat Youssef, Eman El-Shenawy, Wael Khair-Eldeen, Tadaharu Adachi, Adel Nofal, Mohsen A. Hassan: Microstructure evolution and phase transformations in microalloyed ARMOX 500T steel during a dilatation process. Materials and Technology, Vol. 57 (2023), pp. 433-440. (https://doi.org/10.17222/mit.2023.804)
186) Tadaharu ADACHI, Yosuke ISHII, Kazuma HIROTA, Daiki TANABE: Ultrasonic monitoring of adhesive curing process between adherends. International Journal of Adhesion and Adhesives, Vol. 124 (2023) p. 103363 (pp. 9). (https://doi.org/10.1016/j.ijadhadh.2023.103363)
185) Momoe SHINGU, Harunobu NAGINO, Tadaharu ADACHI: Linear-buckling analysis of slender columns made of axially functionally graded materials using B-spline Ritz method. Journal of Structures and Materials in Civil Engineering, Vol. 38 (2023) pp. 23-33.
INTERNATIONAL CONFERENCE
125) Tadaharu Adachi, Yuki Nakata: Novel measurement method for micro-impact testing based on electromagnetic phenomena. 11th International Symposium on Impact Engineering, (2023). (December 3rd – 5th, Parmelia Hilton Perth, 2023, Perth, Australia)
2022
AWARD
Tadaharu ADACHI: Fellow of the Japan Society of Mechanical Engineers (JSME Fellow), (2021).
ORIGINAL PAPERS
184) Ignatius EBO-QUANSAH, Ahmed H. HASSANIN, Tadaharu ADACHI, Mohsen A. HASSAN: Ballistic testing simulation of ultra-high strength steel water layer sandwich structure. Materials Science Forum, Vol. 1069 (2022) pp. 23-29. https://doi.org/10.4028/p-79ur58
183) Tadaharu ADACHI, Mei-Wan KHONG, Yosuke ISHII, Satoshi YOSHIDA, Kazuki KANEHARA, Yusuke KOBAYASHI, Shusaku AKIBA: Development of impact micro-indentation testing machine for evaluation of surface fracture. Advanced Experimental Mechanics, Vol. 7 (2022) p. 55-64. https://doi.org/10.11395/aem.7.0_55
182) Yosuke ISHII, Tadaharu ADACHI: Theoretical Analysis of Lamb Wave Reflection and Transmission at a Curved Corner. Journal of JSNDI, Vol. 71 (2022) pp. 257-264 (in Japanese). https://doi.org/10.11396/jjsndi.71.257
181) Tadaharu ADACHI, Kohei MIYARA, Yosuke ISHII: Non-contact measurement of impact load due to collision of ferromagnetic projectile based on electromagnetic induction. International Journal of Impact Engineering, Vol. 159 (2022) p. 104040 (pp. 1-8). https://doi.org/10.1016/j.ijimpeng.2021.104040
INTERNATIONAL CONFERENCE
124) Tadaharu ADACHI: Mechanical properties of nano-composites in glassy and rubbery
states (Plenary talk). The 12 th International Conference on Mechanics of Time–Dependent Materials, (2022) p. 14. (September 6-9, 2022, The University of Texas at Dallas, USA)
REVIEW
Ignatius EBO-QUANSAH, Ahmed HASSANIN, Tadaharu ADACHI, Mohsen HASSAN: An overview on penetration mechanism and optimization techniques of steel sandwich structure under ballistic testing. International Journal of Materials Technology and Innovation, Vol. 2 (2022) pp. 55-73. (https://doi.org/10.21608/ijmti.2022.162681.1060)
2021
ORIGINAL PAPERS
180) Nene YAMAMOTO, Harunobu NAGINO, Tadaharu ADACHI: Linear-buckling analysis of slender columns with Young’s modulus exponentially graded along axial direction using B-spline Ritz method. Journal of Structures and Materials in Civil Engineering, No. 37 (2021) pp. 39-51 (in Japanese).
179) Tadaharu ADACHI, Takeru OZAWA, Yosuke ISHII: Development of small drop-weight testing machine based on electromagnetic induction. Experimental Mechanics, Vol. 61 (2021) pp. 1333-1342. https://doi.org/10.1007/s11340-021-00750-5
178) Tadaharu ADACHI, Keita IGARI, Yosuke ISHII: Evaluating penetration strengths of rubber sheets under transverse pressure. Journal of the Society of Materials Science, Japan, Vol. 70 (2021) pp. 789-795 (in Japanese). https://doi.org/10.2472/jsms.70.789
OTHERS
Tadaharu ADACHI, et al.: Calibrators for strain measuring devices. Standards of Japanese Society for Non-Destructive Inspection (NDIS) 4301: 2021, (2021), The Japanese Society of Non-Destructive Inspection.
Tadaharu ADACHI, et al.: Principle of strain gauge testing. Japanese Industrial Standard (JIS) Z2359: 2021, (2021), Japanese Standards Association.
Tadaharu ADACHI: Fundamental issues and the applications of impact engineering, V: Impact force and stress due to collision. Journal of the Society of Materials Science, Japan, Vol. 70 (2021) pp. 712-718 (in Japanese). https://doi.org/10.2472/jsms.70.712
Tadaharu ADACHI: Review on stress/strain measurement. Journal of the Japanese Society for Non-Destructive Inspection, Vol. 70 (2021) pp. 305-306 (in Japanese).
Tadaharu ADACHI: Review of the special issues in the past decade and future prospects, Stress/strain measurement. Journal of the Japanese Society for Non-Destructive Inspection, Vol. 70 (2021) pp. 23-25 (in Japanese).
2020
ORIGINAL PAPERS
177) Harunobu NAGINO, Tadaharu ADACHI: A consideration on accuracy of Ritz method with simple polynomial basis for problem of longitudinal free vibration f elastic bars with variable cross-sections. Journal of Structures and Materials in Civil Engineering, No.36 (2020) pp. 87-97 (in Japanese).
176) Tadaharu ADACHI, Ayaka NODA, Yosuke ISHII: Linear elastic properties of silicone rubbers filled with nano- and micro-silica particles. Mechanical Engineering Journal, Vol. 7 (2020), p. 20-00358 (pp. 1-9) (DOI: 10.1299/mej.20-00358).
175) Tadaharu ADACHI, Yosuke ISHII: Application of electromagnetic induction for impact load measurement. IOP Conference Series: Materials Science and Engineering, Vol. 920 (2020) p. 012027 (pp. 1-6) (DOI: 10.1088/1757-899X/920/1/012027).
174) Yosuke ISHII, Shiro BIWA, Tadaharu ADACHI: Second-harmonic generation of two-dimensional elastic wave propagation in an infinite layered structure with nonlinear spring-type interfaces. Wave Motion, Vol. 96 (2020) pp. 102569-1-102569-18 (DOI: 10.1016/j.wavemoti.2020.102569).
OTHERS
Tadaharu ADACHI: Review on stress/strain measurement. Journal of the Japanese Society for Non-Destructive Inspection, Vol. 69 (2020) pp. 369-372 (in Japanese).
Tadaharu ADACHI: For the special issue on the “Development of Measuring Method of Dynamic Stress and Strain”. Journal of the Japanese Society for Non-Destructive Inspection, Vol. 69 (2020) p. 161 (in Japanese).
Yosuke ISHII, Kohei SUGAI, Tadaharu ADACHI: Evaluation of interlayer interfacial stiffness of multilayers using the ultrasonic reflection spectrum. Journal of the Japanese Society for Non-Destructive Inspection, Vol. 69 (2020) pp. 181-185 (in Japanese).
Tadaharu ADACHI, Yosuke ISHII: Measurement method of impact load based on the electromagnetic induction phenomena. Journal of the Japanese Society for Non-Destructive Inspection, Vol. 69 (2020) pp. 192-197 (in Japanese).
2019
AWARD
Tadaharu ADACHI: Study on control and design of mechanical properties of polymer composites by filling nano-particles. 36th Nagai Technology Award (The NAGAI Foundation for Science and Technology).
ORIGINAL PAPER
173) Yosuke ISHII, Tadaharu ADACHI: Analysis of acoustic second-harmonic generation in alternating multilayered structure with closed defect at interlayer interface. Journal of the Society of Material Science, Japan, Vol. 68 (2019) pp. 358-365 (in Japanese).
BOOKS
30) Tadaharu ADACHI (author) et al.: Problems in Strain Gauge Testing III, (2019), Japan Society of Non-Destructive Inspection (in Japanese).
29) Tadaharu ADACHI (author) et al.: Problems in Strain Gauge Testing II, (2019), Japan Society of Non-Destructive Inspection (in Japanese).
28) Tadaharu ADACHI (author) et al.: Problems in Strain Gauge Testing I, (2019), Japan Society of Non-Destructive Inspection (in Japanese).
27) Tadaharu ADACHI, Yuto MOCHIZUKI, Yosuke ISHII: Chapter 1. Measurement system of impact force and specimen deflection based on electromagnetic induction phenomena. Dynamics and Control of Advanced Structures and Machines (Edited by V. P. Matveenko, Michael Krommer, Alexander Belyaev, Hans Irschik) (2019), pp. 1-9, Springer.
26) Yosuke ISHII, Tadaharu ADACHI: Chapter 5. Analysis of acoustic second-harmonic generation in a multilayered structure with nonlinear interfaces. Dynamics and Control of Advanced Structures and Machines (Edited by V. P. Matveenko, Michael Krommer, Alexander Belyaev, Hans Irschik) (2019), pp. 65-73, Springer.
INTERNATIONAL CONFERENCES
123) Tadaharu ADACHI, Yosuke ISHII: Applications of electromagnetic induction to measuring impact load. Book of Abstract, International Conference of Global Network for Innovative Technology and International Conference of on Vibration, Sound and System Dynamics (IGNITE-ICVSSD 2019) (2019) p. 27. (December 2, 2019, Penang, Malaysia).
122) Kohei SUGAI, Yosuke ISHII, and Tadaharu ADACHI: Second-harmonic generation in adhesively bonded multilayers with closed defect at interlayer interface. Abstracts of International Conference on Advanced Technology in Experimental Mechanics 2019 (ATEM’19) p. 1. (October 7-10, 2019, Niigata, Japan).
121) Yosuke ISHII, Kouichi HIRAOKA, Sota UKEJI, Tadaharu ADACHI: Non-collinear interaction of guided waves in plates. Abstract Book of the 2019 ICU International Congress on Ultrasonics (2019) p. 182. (September 3-6, 2019, Bruges, Belgium)
120) Tadaharu ADACHI, Keita IGARI, Yosuke ISHII: Measuing penetration strength of rubber plate under lateral pressure based on electromotive induction phenomena. Proceedings of 10th International Symposium on Impact Engineering 2019 (ISIE2019) (Edited by Zoltan Major, Erich Peter Klement, Matei-Constantin Miron, Veronika M. Miron) (2019) pp. 293-294. (July 2-5, 2019, Gmunden, Austria)
OTHER
Tadaharu ADACHI et al.: Test Methods for Static Strain Measuring Instruments. Standards of Japanese Society for Non-Destructive Inspection (NDIS) 4105:2019, (2019), The Japanese Society of Non-Destructive Inspection.
2018
AWARD
Tadaharu ADACHI, Naoki MATSUKAWA, Chihiro TAKAMIZO, Yosuke ISHII: 2018 distinguished paper award contribution of the Japanese Society for Experimental Mechanics. (Tadaharu ADACHI, Naoki MATSUKAWA, Chihiro TAKAMIZO, Yosuke ISHII: Measuring method of impact load in collision of small impactor based on electromagnetic induction. Journal of the Japanese Society for Experimental Mechanics, Vol. 17 (2017) pp. 231-236 (in Japanese).)
ORIGINAL PAPERS
172) Tadaharu ADACHI, Naoki MATSUKAWA, Chihiro TAKAMIZO, Yosuke ISHII: New diagnostic method for evaluating penetration strength of rubber sheet by measuring electromagnetic induction. International Journal of Impact Engineering, Vol. 121 (2018) p. 172-179 (DOI: 10.1016/j.ijimpeng.2018.07.002).
171) Yosuke ISHII, Koichi HIRAOKA, Tadaharu ADACHI: Finite-element analysis of non-collinear mixing of two lowest-order antisymmetric Rayleigh-Lamb waves. Journal of the Acoustical Society of America, Vol. 144 (2018) p. 53-68 (DOI: 10.1121/1.5044422).
170) Tadaharu ADACHI, Zoltan MAJOR, Kenji FUJII, Kohei MIKUMA, Markus Karamoy Umboh, Kyohei TAKEO, Yosuke ISHII: Measurement of dynamic fracture toughness by double torsion testing. Mechanical Engineering Journal, Vol. 5 (2018) p.17-00529 (pp.1-11) (DOI:10.1299/mej.17-00529).
169) Yosuke ISHII, Shiro BIWA, Tadaharu ADACHI: Non-collinear interaction of guided elastic waves in an isotropic plate. Journal of Sound and Vibration, Vol. 419 (2018) pp. 390-404.
168) Tadaharu ADACHI, Yuki YAMADA, Yosuke ISHII: Interphase-layer effect on deformation of silicone rubber filled with nano-silica particles. Journal of Applied Polymer Science, Vol. 135 (2018) p. 45880 (pp. 1-7) (DOI: 10.1002/app.45880).
167) Yosuke ISHII, Shiro BIWA, Tadaharu ADACHI: Second-harmonic generation in a multilayered structure with nonlinear spring-type interfaces embedded between two semi-infinite media. Wave Motion, Vol. 76 (2018) pp. 28-41.
BOOK
25) Tadaharu ADACHI, Kyohei TAKEO: Section 16 Evaluating impact-reduction effect of foam resin film. High Strength of Foamed and Porous Resins and their Applications, (2018), Technical Information Institute, pp.174-180.
INVITED LECTURES
Tadaharu ADACHI, Yosuke ISHII: Measurement of impact load due to electromotive force. 49th Symposium on Stress-strain Measurement and Strength Evaluation, at January 20, 2018.
2017
AWARD
Tadaharu ADACHI: 2017 Award for distinguished contribution, Materials and Mechanics Division of The Japan Society of Mechanical Engineers (JSME).
Nene YAMAMOTO, Harunobu NAGINO, Tadaharu ADACHI, Masahiro HIGUCHI: Best paper award, 5th Symposium of KABSE, Kyushu Association for Bridge and Structural Engineering
ORIGINAL PAPERS
166) Tadaharu ADACHI, Takeru OZAWA, Hardi WITONO, Sho ONISHI, Yosuke ISHII: Energy absorption of thin-walled cylinders filled with silicone rubber subjected to low-velocity impact. Mechanical Engineering Journal, Vol. 4 (2017) DOI: 10.1299/mej.17-00052 (pp.1-10).
165) Tadaharu ADACHI, Naoki MATSUKAWA, Chihiro TAKAMIZO, Yosuke ISHII: Measuring method of impact load in collision of small impactor based on electromagnetic induction. Journal of the Japanese Society for Experimental Mechanics, Vol. 17 (2017) pp. 231-236 (in Japanese). https://doi.org/10.11395/jjsem.17.231,
164) Yosuke ISHII, Shiro BIWA, Tadaharu ADACHI: Evaluation of interlaminar interfacial stiffnesses and ply complex moduli of carbon/epoxy composite laminates by ultrasonic transmission characteristics. Journal of the Japanese Society for Experimental Mechanics, Vol. 17 (2017) Vol. 17 (2017) pp. 124-130. (in Japanese)
INTERNATIONAL CONFERENCES
119) Yosuke ISHII, Tadaharu ADACHI: Analysis of acoustic second-harmonic generation in a multilayer structure with nonlinear interfaces. 3rd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, (2017). Perm, Russia, Sep 18-22, 2017).
118) Tadaharu ADACHI, Naoki MATSUKAWA, Chihiro TAKAMIZO, Yosuke ISHII: Measurement of impact load due to collision of small impactor. 3rd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, (2017). Perm, Russia, Sep 18-22, 2017).
117) Takahiro KINOSHITA, Takashi KAWAKAMI, Tadaharu ADACHI, Masahiro FUNAKI: Stress-based design standard for 321 type of multilayered ceramic capacitor. Proceedings of the ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK2017), (2017) IPack2017-74099, pp. 1-4. (The ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK2017), San Francisco, California, USA, Aug 29-Sep 1, 2017)
BOOKS
24) Tadaharu ADACHI (author) et al.: Strain Gauge Testing III, (2017), Japan Society of Non-Destructive Inspection (in Japanese).
23) Tadaharu ADACHI (author and editor) et al.: Strain Gauge Testing II, (2017), Japan Society of Non-Destructive Inspection (in Japanese).
22) Tadaharu ADACHI (author) et al.: Strain Gauge Testing I, (2017), Japan Society of Non-Destructive Inspection (in Japanese).
21) Tadaharu ADACHI: Chapter 1. Fundamental theory of impact stress and force. Failure and Fracture Mechanics and Enhancement Technology of Impact Resistance of Plastics, (2017) pp. 1-27, Science & Technology, Tokyo.
20) Tadaharu ADACHI, Markus Karamoy Umboh, Tadamasa NEMOTO, Masahiro HIGUCHI, Zoltan MAJOR: Chapter 25. Mechanical properties of epoxy resins filled with nano-silica particles, Dynamics and Control of Advanced Structures and Machines (Edited by Hans Irschik, Alexander K. Belyaev, Michael Krommer), (2017), pp. 225-234, Springer, Wien.
OTHER
Tadaharu ADACHI, Yosuke ISHII: Impact load. Journal of the Japanese Society for Experimental Mechanics, Vol. 17 (2017) Vol. 17 (2017) pp. 167-170. (in Japanese)
2016
ORIGINAL PAPERS
163) Tadaharu ADACHI, Masashi OSADA, Keiko WATANABE: Measuring behavior of impactor penetrating through polymer sheet based on electromagnetic induction. Key Engineering Materials, Vol. 715 (2016) pp. 122-127.
162) Kyohei TAKEO, Taichi NOGAMI, Tadaharu ADACHI, Ryohei KORETOH, Hitoshi TADA: Effect of acrylic foam film on impact reduction. Key Engineering Materials, Vol. 715 (2016) pp. 107-110.
161) Kyohei TAKEO, Tadaharu ADACHI, Ryohei KORETOH, Hitoshi TADA:Estimation effect of load reduction of acrylic foam film by dynamic three-point bending test. Transactions of the JSME, Vol. 82 (2016) DOI: 10.1299/transjsme.15-00363. (in Japanese).
INTERNATIONAL CONFERENCES
116) Taichi NOGAMI, Tadaharu ADACHI , Kyohei TAKEO , Ryohei KORETOH, Hitoshi TADA: Measuring dynamic compressive behaviors of thin acrylic foam films due to drop weight test, Extended Abstracts on The 10th Asia-Pacific Conference on Fracture and Strength, (2016) pp. 493-494. (The 10th Asia-Pacific Conference on Fracture and Strength (APCFS2016), Toyama, Japan, Sep.19-22, 2016).
115) Takeru OZAWA, Tadaharu ADACHI, Wittono HARDI: Effect of filling rubber on impact energy absorption of a thin-walled cylinder subjected to low-velocity axial impact, Extended Abstracts on The 10th Asia-Pacific Conference on Fracture and Strength, (2016) pp. 491-492. (The 10th Asia-Pacific Conference on Fracture and Strength (APCFS2016), Toyama, Japan, Sep.19-22, 2016).
114) Tadaharu ADACHI, Masashi OSADA, Keiko WATANABE: Measuring behavior of impactor penetrating through polymer sheet based on electromagnetic induction. Abstracts Book of The 9th International Symposium on Impact Engineering (ISIE2016) (2016) p. 87. (The 9th International Symposium on Impact Engineering (ISIE2016), Tainan, Taiwan, Sep 5-9. 2016).
113) Kyohei TAKEO, Taichi NOGAMI, Tadaharu ADACHI, Ryohei KORETOH, Hitoshi TADA: Effect of Acrylic Foam Film on Impact Reduction. Abstracts Book of The 9th International Symposium on Impact Engineering (ISIE2016) (2106) p. 90. (The 9th International Symposium on Impact Engineering (ISIE2016), Tainan, Taiwan, Sep 5-9. 2016).
OTHERS
Tadaharu ADACHI et al.: Performance Test Methods for Dynamic Strain Measuring Instruments. Standards of Japanese Society for Non-Destructive Inspection (NDIS) 4104:2016, (2016), The Japanese Society of Non-Destructive Inspection.
2015
ORIGINAL PAPERS
160) Harunobu NAGINO, Tadaharu ADACHI: Application of tablet-type device to class of structural mechanics and dynamics. Journal of Japan Society of Civil Engineers, Ser. H (Engineering Education and Practice), Vol. 71 (2015) pp. 78-91. (in Japanese).
159) Masahiro HIGUCHI, Takuma SAKA, Tadaharu ADACHI, Harunobu NAGINO: Numerical evaluation on impact behavior of functionally graded foam materials. Journal of the Society of Materials Science Japan, Vol. 64 (2015) pp. 879-805. (in Japanese).
158) Kyohei TAKEO, Tadaharu ADACHI, Masashi OSADA, Masahiro HIGUCHI, Ryohei KORETOH, Hitoshi TADA: Effect of impact reduction due to acrylic foam film. Transactions of the JSME, Vol. 81 (2015) DOI: 10.1299/transjsme.14-00682. (in Japanese).
157) Harunobu NAGINO, Tadaharu ADACHI: Education effect of using cloud storage system on self-study in reviewing for structural mechanics. Journal of Japan Society of Civil Engineers, Ser. H (Engineering Education and Practice), Vol. 71 (2015) pp. 28-38.
156) Tadaharu ADACHI, Takao KATAOKA, Masahiro HIGUCHI: Predicting impact shear strength of phenolic resin adhesive blended with nitrile rubber. International Journal of Adhesion and Adhesives, Vol. 56 (2015), pp. 53-60.
INTERNATIONAL CONFERENCES
112) Kyohei TAKEO, Tadaharu ADACHI, Ryohei KORETOH, Hitoshi TADA: Effect of acrylic foam on reduction of impact loading to beam. Abstract of International Conference on Advanced Technology in Experimental Mechanics 2015 (2015) p.152. (International Conference on Advanced Technology in Experimental Mechanics 2015 (ATEM’15), Toyohashi, JAPAN, Oct 4-8, 2015).
111) Atsushi OBA, Masahiro HIGUCHI, Toshiaki MATUI, Hiroshi TACHIYA, Tadaharu ADACHI: Time dependent elastic modulus of soft epoxy resins for flexible portector. Abstract of International Conference on Advanced Technology in Experimental Mechanics 2015 (2015) p.158. (International Conference on Advanced Technology in Experimental Mechanics 2015 (ATEM’15), Toyohashi, JAPAN, Oct 4-8, 2015).
110) Tadaharu ADACHI: Interaction effect of filling nanoparticle and matrix resin on mechanical properties of composite, 2nd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines (2015), (Vienna, AUSTRIA, Sep 21-24, 2015).
BOOK
19) Tadaharu ADACHI: Mechanical properties of particles-filled composites. Improvement of Properties, and Functional and Composite Technologies of Epoxy Resin for Electronics, (2015), Technical Information Institute, pp.2-14.
OTHERS
Keisuke HAYABUSA, Dai KUDO, Tadaharu ADACHI, Kikuo KISHIMOTO: Measurement of bending and mean stress for rotating shaft using thermography. Turbomachinery, Vol. 43 (2015) pp. 668-673.
Tadaharu ADACHI: Report of standardization committee. Journal of the Japanese Society for Non-Destructive Inspection, Vol.64 (2015), pp.395-399.
2014
ORIGINAL PAPERS
155) Arito SHIGA, Harunobu NAGINO, Tadaharu ADACHI, Tomisaku MIZUSAWA, Takashi MIKAMI: Comparison of three-dimensional theory of elasticity and plate theory for bending problem of rectangular plates on winkler foundation. Journal of Structures and Materials in Civil Engineering, Vol.30 (2014) pp.99-111.
154) Harunobu NAGINO, Arito SHIGA, Tadaharu ADACHI, Tomisaku MIZUSAWA, Takashi MIKAMI: Ranges in application of classical theory and Mindlin theory for bending problem of rectangular plate under surface force on elastic foundation. Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics), Vol. 70 (2014), pp. I-12-I-23.
153) Markus Karamoy UMBOH, Tadaharu ADACHI, Tadamasa NEMOTO, Masahiro HIGUCHI, Zoltan MAJOR: Non-stoichiometric curing effect on fracture toughness of nanosilica particulate-reinforced epoxy composites. Journal of Materials Science. Vol. 49 (2014), pp.7454-7461. DOI: 10.1007/s10853-014-8450-6.
152) Matei Constantin MIRON, Zoltan MAJOR, Tahaharu ADACHI: Fracture Behavoir of weld lines in injection molded components loaded under real operating conditions. Procedia Materials Science, Vol. 3 (2014), pp. 2048-2053.
151) Keisuke HAYABUSA, Dai KUDO, Kikuo KISHIMOTO, Tadaharu ADACHI: Measurement of stress distribution for rotating shaft using thermography. Transactions of the JSME, Vol. 80, No.815 (2014) DOI: 10.1299/transjsme.2014smm0184. (in Japanese).
150) Masahiro HIGUCHI, Shun SUZUKI, Tadaharu ADACHI, Hiroshi TACHIYA: Improvement of energy absorption of circular tubes subjected to high velocity impact. Applied Mechanics and Materials, Vol. 566 (2014), pp.575-580.
149) Matei Constantin MIRON, Zoltan MAJOR, Tadaharu ADACHI: Modeling of low energy, low velocity impact failure of a honeycomb sandwich material. Applied Mechanics and Materials, Vol. 566 (2014), pp.256-261.
INTERNATIONAL CONFERENCES
109) Markus Karamoy UMBOH, Tadaharu ADACHI, Masahiro HIGUCHI, Zoltan MAJOR: Effect of nano-silica particle addition on compression behavior of non-stoichiometrically cured resin. International Conference on Environmentally Friendly Civil Engineering Construction and Materials, (2014) p.A11 (International Conference on Environmentally Friendly Civil Engineering Construction and Materials (EFCM2014), Manado, North Sulawesi, Indoesia).
108) Tadaharu ADACHI, Kenji FUJII, Zoltan MAJOR: Dynamic Fracture toughness of mechanical properties of non-stoichiometrically cured epoxy resin measured by double torsion test. Proceedings of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, (2014) pp. 327-330 (The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2014), Nara, Japan, Oct 10-13, 2014).
107) Tadaharu ADACHI, Masahiro HIGUCHI: Dynamic stress in functionally-graded bar subjected to collision of bar. Proceedings of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, (2014) pp. 115-116 (The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2014), Nara, Japan, Oct 10-13, 2014).
106) Atsuto OBA, Masahiro HIGUCHI, Suguru TAMBO, Hiroshi TACHIYA, Tadaharu ADACHI: Mechanical properties of soft epoxy resin for flexible protector. Proceedings of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, (2014) pp. 255-256 (The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2014), Nara, Japan, Oct 10-13, 2014).
105) Tadaharu ADACHI, Masahiro FUNAKI, Harunobu NAGINO: Mechanical properties of functionally graded beams manufactured by particle sedimentation. Proceedings of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, (2014) pp. 583-584 (The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2014), Nara, Japan, Oct 10-13, 2014).
104) Tadaharu ADACHI, Ikuko FURUTA, Takamitsu MATSUI, Tadamasa NEMOTO, Zoltan MAJOR: Mechanical properties of non-stoichiometric cured nano-silica particles-filled epoxy composites. Proceedings of the Fourth Asian Conference on Mechanics of Functional Materials and Structures, (2014) pp. 581-582 (The Fourth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2014), Nara, Japan, Oct 10-13, 2014).
103) Kyohei TAKEO, Tadaharu ADACHI, Masashi OSADA, Masahiro HIGUCHI , Hitoshi TADA: Estimating dynamic cushion effect of acrylic foam film. Abstract Booklet of The 9th International Conference on Mechanics of Time Dependent Materials, (2014) p.168 (The 9th International Conference on Mechanics of Time Dependent Materials (MTDM2014), Montreal, Canada, May 27-29, 2014).
BOOKS
18) Tadaharu ADACHI: Chapter 6. Impact response and collision phenomena, Fundamentals and Applications of Impact Engineering (Edited by Takashi Yokoyama), (2014), pp.95-114 Kyoritsu Shuppan (in Japanese).
17) Tadaharu ADACHI, Masahiro HIGUCHI: Wave Propagation in functionally graded material bar due to collision. Mechanics and Model-Based Control of Advances Engineering Systems (Edited by Alexander K. Belyaev, Hans Irschik, Michael Krommer), (2014), pp.1-10, Springer, Wien.
16) Masahiro HIGUCHI, Tadaharu ADACHI: Dynamic mechanical properties of functionally graded syntactic epoxy foam. Mechanics and Model-Based Control of Advances Engineering Systems (Edited by Alexander K. Belyaev, Hans Irschik, Michael Krommer), (2014), pp.171-180, Springer, Wien.
15) Zoltan MAJOR, Matei Constantin MIRON, Martin REITER, Tadaharu ADACHI: Applicability of various fracture mechanics approaches for short fiber reinforced injection molded polymer composites and components. Mechanics and Model-Based Control of Advances Engineering Systems (Edited by Alexander K. Belyaev, Hans Irschik, Michael Krommer), (2014), pp.217-227, Springer, Wien.
INVITED LECTURES
Tadaharu ADACHI: Effect of adding particles on mechanical properties of particulate-filled polymer composites. 50th Lecture of Manufacturing Research Group, at July 18, 2014.
Tadaharu ADACHI: Material mechanics problems in mobile devices. 18th Evening Colloquium in Electronics-Inspired Interdisciplinary Institute (EIIRIS), Toyohashi University of Technology, at November 11, 2014.
OTHERS
Tadaharu ADACHI: Dynamic measurement by electric resistane strain gage and strain gage transducer. Journal of JSEM, Vol,14 (2014), pp.69-72.
Tadaharu ADACHI: Report of standardization committee. Journal of the Japanese Society for Non-Destructive Inspection, Vol.63 (2014), pp.421-425.
Tadaharu ADACHI et al.: Connectors for strain measuring instruments. Standards of Japanese Society for Non-Destructive Inspection (NDIS) 4102:2014, (2014), The Japanese Society of Non-Destructive Inspection.
Tadaharu ADACHI et al.: Miniature connectors for strain measuring instruments. Standards of Japanese Society for Non-Destructive Inspection (NDIS) 4109:2014, (2014), The Japanese Society of Non-Destructive Inspection.
2013
AWARD
Tadaharu ADACHI: 2012 Outstanding achievement award, Committee of Impact, The Society of Materials Science, Japan.
ORIGINAL PAPERS
148) Arito SHIGA, Harunobu NAGINO, Tadaharu ADACHI: Three-dimensional elastic analysis of rectangular thick plates under patch loads on elastic foundations. Journal of Structures and Materials in Civil Engineering, Vol.29 (2013) pp.21-32.
147) Tadaharu ADACHI, Kozo OISHI, Masahiro HIGUCHI, Markus Karamoy UMBOH, Zoltan MAJOR: Non-stoichiometric curing effect on dynamic mechanical properties of bisphenol A-type epoxy resins. Journal of the Japanese Society for Experimental Mechanics Vol.13 (2013) pp.s148-s153.
146) Markus Karamoy UMBOH, Tadaharu ADACHI, Kouzo OISHI, Masahiro HIGUCHI, Zoltan MAJOR: Mechanical properties of nano-silica particulate-reinforced epoxy composites considered in terms of crosslinking effect in matrix resins. Journal of Materials Science, Vol.48 (2013), pp.5148-5156.
145) Tadaharu ADACHI, Masahiro HIGUCHI: Impulsive responses of functionally graded material bars due to collision. Acta Mechanica, Vol.224 (2013), pp.1061-1076.
144) Hiroaki NAKAMOTO, Tadaharu ADACHI, Masahiro HIGUCHI: Approximate analysis of progressive deformation in honeycomb structures subjected to in-plane loading. Archive of Applied Mechanics, Vol. 83 (2013), pp. 379-396.
INTERNATIONAL CONFERENCES
102) Tadaharu ADACHI: Estimation of impact damage in polymer composite component by drop weight test. Proceedings of International Conferecne of Global Network for Innovative Technology (IGNITE 2013), (2013), p.35. (International Conference of Global Network Innovative Technology (IGNITE 2013), Penang, Malaysia, December 5, 2013).
101) Tadaharu ADACHI, Sii Lee SII, Zoltan MAJOR: Estimating method of impact strength and damage by drop weight test. Abstracts Book of International Conference on Experimental Mechanics 2013 and 12th Asian Conference on Experimental Mechanics (ICEM‘13-ACEM-12th), (2013) p. 45 (International Conference on Experimental Mechanics 2013 and 12th Asian Conference on Experimental Mechanics (ICEM‘13-ACEM-12th), Bangkok, Thailand, November 25-27, 2013).
100) Kyohei TAKEO, Tadaharu ADACHI, Masashi OSADA, Masahiro HIGUCHI, Hitoshi TADA: Estimating impact reduction of thin acrylic foam film by drop ball test. Abstracts Book of International Conference on Experimental Mechanics 2013 and 12th Asian Conference on Experimental Mechanics (ICEM‘13-ACEM-12th), (2013) p. 45 (International Conference on Experimental Mechanics 2013 and 12th Asian Conference on Experimental Mechanics (ICEM‘13-ACEM-12th), Bangkok, Thailand, November 25-27, 2013).
99) Masahiro HIGUCHI, Makoto SUZUKI, Tadaharu ADACHI, Hiroshi TACHIYA: Axial crushing behavior of aluminum alloy circular tube filled with syntactic epoxy foam. Abstracts Book of International Conference on Experimental Mechanics 2013 and 12th Asian Conference on Experimental Mechanics (ICEM‘13-ACEM-12th), (2013) p. 57 (International Conference on Experimental Mechanics 2013 and 12th Asian Conference on Experimental Mechanics (ICEM‘13-ACEM-12th), Bangkok, Thailand, November 25-27, 2013).
98) Markus Karamoy UMBOH, Tadaharu ADACHI, Kazo OISHI, Masahiro HIGUCHI, Zoltan MAJOR: Effect of non-stoichiometric curing on dynamic compression properties of epoxy composites filled with nano-silica particles. Abstracts Book of 8th International Symposium on Impact Engineering (ISIE2013), (2013) p.97. (8th International Symposium on Impact Engineering (ISIE2013), Osaka, Japan, September 2-6, 2013).
97) Tadaharu ADACHI, Zoltan MAJOR, Masahiro HIGUCHI: Novel evaluation method of impact strength and damage development. Abstracts Book of 8th International Symposium on Impact Engineering (ISIE2013), (2013) p.113. (8th International Symposium on Impact Engineering (ISIE2013), Osaka, Japan, September 2-6, 2013).
96) Kyohei TAKEO, Tadaharu ADACHI, Masahiro HIGUCHI: Dynamic compressive properties of acrylic thin foam films. Abstracts Book of 8th International Symposium on Impact Engineering (ISIE2013), (2013) p.127. (8th International Symposium on Impact Engineering (ISIE2013), Osaka, Japan, September 2-6, 2013).
95) Masahiro HIGUCHI, Syun SUZUKI, Tadaharu ADACHI, Hiroshi TACHIYA: Improvement of energy absorption of circular tubes subjected to high velocity impact. Abstracts Book of 8th International Symposium on Impact Engineering (ISIE2013), (2013) p.121. (8th International Symposium on Impact Engineering (ISIE2013), Osaka, Japan, September 2-6, 2013).
94) Matei Constantin Miron, Zoltan MAJOR, Tadaharu ADACHI: Numerical modeling of damage and failure in a honeycomb sandwich material loaded under low energy, low velocity impact. Abstracts Book of 8th International Symposium on Impact Engineering (ISIE2013), (2013) p.93. (8th International Symposium on Impact Engineering (ISIE2013), Osaka, Japan, September 2-6, 2013).
BOOK
14) Tadaharu ADACHI: Mechanical properties of particles-filled composites, Technologies of Kneading and Dispersion, Controls of Dispersion and Interfaces in Composites, (2013), Technical Information Institute, pp.81-86.
OTHERS
Tadaharu ADACHI: Report of standardization committee. Journal of the Japanese Society for Non-Destructive Inspection, Vol.62 (2013), pp.396-400.
INVITED LECTURE
Tadaharu ADACHI: Mechanical properties of non-stoichiometrically cured epoxy resins and nano-silica particles filled epoxy resins, Special Lecture of the Society of Epoxy Resin Technology, at December 12, 2013.
2012
ORIGINAL PAPERS
143) Masahiro HIGUCHI, Yasuji HAMAGUCHI, Shun SUZUKI, Tadaharu ADACHI: Dynamic Behavior of Circular Tubes Subjected to High Impact Loading. Journal of the Japanese Society for Experimental Mechanics, Vol.12 (2012), pp.s127-132.
142) Masahiro HIGUCHI, Takuma SAKA, Kenta FUJIMOTO, Tadaharu ADACHI: Energy Absorption of Thin-Walled Circular Tube Filled with Syntactic Epoxy Foam Subjected to Axial Compression. Journal of the Japanese Society for Experimental Mechanics, Vol.12 (2012), pp.s133-138.
141) Masahiro HIGUCHI, Tadaharu ADACHI, Yosuke FUKUSHIMA and Wakako ARAKI: Energy absorption of a cylindrical tube with varying cross-section subjected to axial impact. Transactions of the JSME (Series A), Vol.78, No.791 (2012), pp.945-954.
140) Masahiro HIGUCHI, Tadaharu ADACHI, Taishi YOSHIOKA, Yuto YOKOCHI: Evaluation on Distributions of Mechanical Properties in Functionally Graded Syntactic Foam. Transactions of the JSME (Series A), Vol.78, No.790 (2012), pp.890-901.
139) Masahiro HIGUCHI, Fumiya TOYAMINE, Tadaharu ADACHI, Harunobu NAGINO: Generalized Shear Deformation Theory for Bending of Inhomogeneous Beams, Journal of Solid Mechanics and Materials Engineering, Vol.6, No.5 (2012), pp.351-360.
138) Masahiro HIGUCHI, Yuto YOKOCHI, Tadaharu ADACHI: Evaluation on Integrated Molding of Functionally-Graded Epoxy Foams. Transactions of the JSME (Series A), Vol.78, No.789 (2012), pp.660-664.
137) Harunobu NAGINO, Mayuko OKAWA, Masahiro HIGUCHI, Tadaharu ADACHI, Tomisaku MIZUSAWA, Takashi MIKAMI: Three-Dimensional Stress Analysis of Thick Plates under Various Transverse Loads Resting on Elastic Foundations. Journal of Structural Engineering, JSCE Vol. 58A (2012) pp. 26-39. (in Japanese)
136) Tadaharu ADACHI, Nobuhiko YOSHIGAKI, Masahiro HIGUCHI: Analysis of Longitudinal Impact Problem for Functionally Graded Materials. Transactions of the JSME (Series A), Vol. 78, No.788 (2012), pp. 502-510. (in Japanese)
135) Farid TRIAWAN, Kikuo KISHIMOTO, Tadaharu ADACHI, Kazuaki INABA, Toshio NAKAMURA, Tohru HASHIMURA: The Elastic Behavior of Aluminum Alloy Foam under Uniaxial Loading and Bending Conditions. Acta Materialia, Vol. 60 (2012) pp. 3084-3093.
134) Masahiro HIGUCHI, Tadaharu ADACHI, Yuto YOKOCHI, Kenta FUJIMOTO: Controlling of Distribution of Mechanical Properties in Functionally-Graded Syntactic Foams for Impact Energy Absorption. Materials Science Forum, Vol. 706-709 (2012) pp.729-734.
133) Tadaharu ADACHI, Masahiro HIGUCHI: Fabrication of Bulk Functionally-Graded Syntactic Foams for Impact Energy Absorption. Materials Science Forum, Vol.706-709 (2012) pp.711-716.
INTERNATIONAL CONFERENCES
93) Tadaharu ADACHI, Masahiro HIGUCHI: Impact response of functionally graded materials. International Conference on Advanced Dynamics and Model Based Control of Structures and Machines (2012), (Saint Petersburg RUSSIA, July 1-4, 2012).
92) Masahiro HIGUCHI, Tadaharu ADACHI: Dynamic mechanical properties of functionally graded syntactic epoxy foam. International Conference on Advanced Dynamics and Model Based Control of Structures and Machines (2012), (Saint Petersburg RUSSIA, July 1-4, 2012).
91) Markus Karamoy UMBOH, Tadaharu Adachi, Kouzou OISHI, Masahiro HIGUCHI, Zoltan MAJOR: Effect of Non-Stoichiometric Curing on Bending Properties of Nano-Silica Particulate-Reinforced Composites. The 8th International Conference on Mechanics of Time-Dependent, Materials, Book of Abstracts, (2012), p.34. (The 8th International Conference on Mechanics of Time-Dependent Materials, Kanazawa, September 23-27).
90) U.D. CAKMAK, F.J. HIPTMAIR, Z. MAJOR, G. JUNGMAYR, E. MARTH, T. ADACHI: Applicability of Elastomeric Time Dependent Behavior in Dynamic Mechanical Damping Systems. The 8th International Conference on Mechanics of Time-Dependent, Materials, Book of Abstracts, (2012), p.32. (The 8th International Conference on Mechanics of Time-Dependent Materials, Kanazawa, September 23-27).
89) Mayuko OKAWA, Harunobu NAGINO, Masahiro HIGUCHI, Tadaharu ADACHI, Tomisaku MUZUSAWA, Takashi MIKAMI: Three-Dimensional Bending Analysis of Rectangular Thick Plates on Elastic Foundations using the B-spline Ritz Method. Proceedings of the 2012 World Congress on Advances in Civil, Environmental, and Materials Research, pp.3182-3196. (The 2012 World Congress on Advances in Civil, Environmental, and Materials Research, Seoul, Korea, August 2012).
88) Markus Karamoy UMBOH, Tadaharu ADACHI, Kozo OISHI, Masahiro HIGUCHI, Zoltan MAJOR: Effect of Non-Stoichiometric Curing on Dynamic Compressive Properties of Nano-Silica Particulate-Reinforced Epoxy Composites. Abstract Book of The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials and The 3rd International Symposium on Advanced Materials Development and Integration of Novel Structural Metallic and Inorganic Materials, (2012), p4-03 (November 5-8, 2012, Toyohashi Japan).
87) Tadaharu ADACHI, Kozo OISHI, Masahiro HIGUCHI, Markus Karamoy UMBOH: Non-Stoichiometric Curing Effect on Dynamic Mechanical Properties of Bisphenol A-Type Epoxy Resin. Proceedings of the Joint International Conference of The 2nd, International Symposium on Experimental Mechanics, The 11th Asian Conference on Experimental Mechanics, 2012 Society for Experimental Mechanics Fall Conference and 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, (2012), Paper #A129, p.1-6, (November 8-11, 2012, Taiwei, Taiwan).
86) Masahiro HIGUCHI, Shun SUZUKI, Tadaharu ADACHI: Dynamic Axial Crushing of Circular Tubes Subjected to High Velocity Impact. Proceedings of the Joint International Conference of The 2nd, International Symposium on Experimental Mechanics, The 11th Asian Conference on Experimental Mechanics, 2012 Society for Experimental Mechanics Fall Conference and 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, (2012), Paper #A134, p.1-6, (November 8-11, 2012, Taiwei, Taiwan).
85) Kyohei TAKEO, Tadaharu ADACHI, Masahiro HIGUCHI, Hitoshi TADA: Dynamic Compression of Acrylic Thin Foam Films. Proceedings of the Joint International Conference of The 2nd, International Symposium on Experimental Mechanics, The 11th Asian Conference on Experimental Mechanics, 2012 Society for Experimental Mechanics Fall Conference and 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, (2012), Paper #A132, p.1-6, (November 8-11, 2012, Taiwei, Taiwan).
BOOK
13) Tadaharu ADACHI, Masahiro HIGUCHI: Development of integral modelling of functionally-graded syntactic foams. Advanced Dynamics and Model-Based Control of Structures and Machines (Edited by Hans Irschik, Michael Krommer, Alexander K. Belyaev), (2012), pp.1-9, Springer, Wien.
OTHERS
Tadaharu ADACHI et al.: Information on Performance Characteristics of Electric Resistance Strain gauges. Standards of Japanese Society for Non-Destructive Inspection (NDIS) 4108-2012, (2012), The Japanese Society of Non-Destructive Inspection.
Tadaharu ADACHI et al.: Principle of Strain Gauge Testing. Standards of the Japanese Society for Non-Destructive Inspection (NDIS) 4402-2012, (2012), The Japanese Society of Non-Destructive Inspection.
Tadaharu ADACHI: Report of Standardization Committee. Journal of the Japanese Society for Non-Destructive Inspection, Vol.61 (2012), pp.398-401.
2011
ORIGINAL PAPERS
132) Farid TRIAWAN, Kikuo KISHIMOTO, Tadaharu ADACHI, Kazuaki INABA, Toshio NAKAMURA, Zhijia LIN, Tohru HASHIMURA: Elastic Bending Behavior of Aluminum Alloy Foam, Procedia Engineering, Vol.10 (2011), pp.2994-2999.
131) Harunobu NAGINO, Masahiro HIGUCHI, Tadaharu ADACHI, Yoshitaka SUETAKE, Tomisaku MIZUSAWA, Takashi MIKAMI: Strain Energy Analysis of Rectangular Plates Resting on Elastic Foundation and Fundamental Study on Validity and Applicable Range of First-Order Shear Deformation Theory. Journal of Structural Engineering, JSCE Vol.57A (2011), pp.27-40 (in Japanese).
130) Tadaharu ADACHI, Yoshinori IMAI, Masahiro HIGUCHI: Fracture Energy of Nano- and Micro-Silica Particle-Filled Epoxy Composites (Invited paper). International Journal of Theoretical and Applied Multiscale Mechanics, Vol.2, No.1 (2011), pp.82-94.
INTERNATIONAL CONFERENCES
84) Masahiro HIGUCHI, Yasuji HAMAGUCHI, Shun SUZUKI, Tadaharu ADACHI: Dynamic Behavior of a Circular Tube Subjected to High Impact Loading. Proceedings of 6th International Symposium on Advanced Science and Technology in Experimental Mechanics, (2011), CD-ROM Paper No. 147. (6th International Symposium on Advanced Science and Technology in Experimental Mechanics 2011 Sendai/Kansai, Osaka, Kansai Airport, Japan, November 3 to 5, 2011)
83) Masahiro HIGUCHI, Takuma SAKA, Kenta FUJIMOTO, Tadaharu ADACHI: Energy Absorption of Thin-Walled Circular Tube Filled with Syntactic Epoxy Foam Subjected to Axial Compression. Proceedings of 6th International Symposium on Advanced Science and Technology in Experimental Mechanics, (2011), CD-ROM Paper No. 148. (6th International Symposium on Advanced Science and Technology in Experimental Mechanics 2011 Sendai/Kansai, Osaka, Kansai Airport, Japan, November 3 to 5, 2011)
82) Masahiro HIGUCHI, Tadaharu ADACHI, Yuto YOKOCHI, Kenta FUJIMOTO: Controlling of Distribution of Mechanical Properties in Functionally-Graded Syntactic Foams for Impact Energy Absorption. Abstracts of International Conference on Processing & Manufacturing of Advanced Materials, Thermec‘2011, (2011) p.154. (International Conference on Processing & Manufacturing of Advanced Materials, Thermec’2011, Quebec, Canada, August 1 to 5, 2011)
81) Tadaharu ADACHI, Masahiro HIGUCHI: Fabrication of Bulk Functionally-Graded Syntactic Foams for Impact Energy Absorption (invited). Abstracts of International Conference on Processing & Manufacturing of Advanced Materials, Thermec‘2011, (2011) p.152. (International Conference on Processing & Manufacturing of Advanced Materials, Thermec’2011, Quebec, Canada, August 1 to 5, 2011)
80) Farid TRIAWAN, Kikuo KISHIMOTO, Tadaharu ADACHI, Kazuaki INABA, Toshio NAKAMURA, Zhijia LIN, Tohru HASHIMURA: Elastic Bending Behavior of Aluminum Alloy Foam, Engineering Procedia, Vol.10 (2011), (11th International Conference on the Mechanical Behavior of Materials, Milano, Italy, June 5 to 9, 2011)
2010
ORIGINAL PAPERS
129) Masahiro HIGUCHI, Ryuusuke KAWAMURA, Yoshinobu TANIGAWA, Tadaharu ADACHI: Magneto-thermo-elastic Stresses Induced by a Transient Magnetic Field in a Conducting Hollow Circular Cylinder. Journal of Thermal Stresses, Vol.33 (2010) pp.775-798.
128) Tadaharu ADACHI, Wakako ARAKI, Masahiro HIGUCHI: Mixture Law Including Particle-Size Effect on Fracture Toughness of Nano- and Micro-Spherical Particle-Filled Composites (Invited paper). Acta Mechanica, Vol.214, No.1-2 (2010), pp.61-69.
127) Farid TRIAWAN, Tadaharu ADACHI, Kikuo KISHIMOTO, Tohru HASHIMURA: Study on Elastic Moduli of Aluminum Alloy Foam under Uniaxial Loading and Flexural Vibration. Journal of Solid Mechanics and Materials Engineering,Vol.4, No.8 (2010), pp.1369-1380.
SURVEY, OTHER
Tadaharu ADACHI, Wakako ARAKI, Masahiro HIGUCHI: Effect of Silica Particles on Mechanical Properties of Epoxy Composites. Journal of the Adhesion Society of Japan, Vol.56, No.6 (2010), pp.222-229.
INTERNATIONAL CONFERENCES
79) Farid TRIAWAN, Kikuo KISHIMOTO, Kazuaki INABA, Tadaharu ADACHI, Zhijia LIN, Toru HASHIMURA: Measuring the Flexural Modulus of Metal Foam. Proceedings of the 5th AOTULE International Postgraduate Students Conference on Engineering, (2010), p.154-157. (November 1-2, 2010, Bandung, Indonesia).
78) Masahiro HIGUCHI, Tadaharu ADACHI, Taishi YOSHIOKA, Yutaka KOBAYASHI: Development of Functionally-Graded Syntactic Foams and Evaluation of Their Mechanical Properties. Proceedings of the Second Asian Conference on Mechanics of Functional Materials and Structures (Edited by Cun-Fa Gao, and Yong-Jian Wang), (2010), pp.25-28. (Second Asian Conference on Mechanics of Functional Materials and Structures, Nanjing, China, October 22 to 25, 2010)
77) Kyohei TAKEO, Harunobu NAGINO, Masahiro HIGUCHI, Tadaharu ADACHI: Three-Dimensional Stress Analysis of Functionally-Graded Rectangular Plates under Transverse Loads. Proceedings of the Second Asian Conference on Mechanics of Functional Materials and Structures (Edited by Cun-Fa Gao, and Yong-Jian Wang), (2010), pp.271-274. (Second Asian Conference on Mechanics of Functional Materials and Structures, Nanjing, China, October 22 to 25, 2010)
76) Harunobu NAGINO, Kyohei TAKEO, Tadaharu ADACHI, Masahiro HIGUCHI: Three-Dimensional Bending Analysis of Rectangular Plates on Elastic Foundation. Proceedings of the Second Asian Conference on Mechanics of Functional Materials and Structures (Edited by Cun-Fa Gao, and Yong-Jian Wang), (2010), pp.95-98. (Second Asian Conference on Mechanics of Functional Materials and Structures, Nanjing, China, October 22 to 25, 2010)
75) Tadaharu ADACHI, Masahiro HIGUCHI: Active Control of Energy Absorption due to Structural Collapse (Invited). Book of Abstracts of Seventh International Symposium on Impact Engineering, (2010), p.12 (Seventh International Symposium on Impact Engineering, July 4-7, 2010, Warsaw, Poland).
74) Tadaharu ADACHI, Masahiro HIGUCHI, Yosuke FUKUSHIMA, Wakako ARAKI: Energy Absorption of a Cylindrical Tube with Varying Cross-Section Subjected to Axial Impact. Book of Abstracts of Seventh International Symposium on Impact Engineering, (2010), p.13 (Seventh International Symposium on Impact Engineering, July 4-7, 2010, Warsaw, Poland)
73) Tadaharu ADACHI, Wakako ARAKI, Masahiro HIGUCHI: Particle-Size Effect on Mechanical Properties of Particle Filled Composites (Invited). Multiscaling of Synthetic and Natural Systems with Self-Adaptive Capability (Edited by Sih G.C., and Chao C.K.), (2010), pp.49-52. (12th International Congress of Mesomechanics, Taipei, Taiwan, June 21 to 25, 2010)
72) Masahiro HIGUCHI, Fumiya TOYAMINE, Tadaharu ADACHI, Hanurobu NAGINO: A Generalized Shear Deformation Theory for Bending of Functionally Graded Materials. Multiscaling of Synthetic and Natural Systems with Self-Adaptive Capability (Edited by Sih G.C., and Chao C.K.), (2010), pp.375-378. (12th International Congress of Mesomechanics, Taipei, Taiwan, June 21 to 25, 2010)
71) Masahiro HIGUCHI, Tadaharu ADACHI: Development of Integral Molding of Functionally-Graded Syntactic Foams. Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines (2010), (Linz Austria, April 26-28, 2010).
BOOK
12) Wakako ARAKI, Shogo WADA, Tadaharu ADACHI: Chapter 8 Viscoelasticity and Morphology of Epoxy Resin/Silica Hybrid Materials Cured with Amine and Acid Anhydride Agents. Advances in Solid Hybrid Materials and Membranes (Edited by Tongwen Xu, and Cuiming Wu), (2010), pp. 269-282, Transworld Research Network, Kerala India.
2009
ORIGINAL PAPERS
126) Wakako ARAKI, Takao KOSHIKAWA, Akihiko YAMAJI, Tadaharu ADACHI: Degradation Mechanism of Scandia-Stabilised Zirconia Electrolytes: Discussion Based on Annealing Effects on Mechanical Strength, Ionic Conductivity, and Raman Spectrum, Solid State Ionics, Vol.180, (2009), pp.1484-1489.
125) Akihiko YAMAJI, Takao KOSHIKAWA, Wakako ARAKI, Tadaharu ADACHI: Stabilization of a Zirconia System and Evaluation of its Electrolyte Characteristics for a Fuel Cell: Based on Electrical and Mechanical Considerations. Transactions of the ASME, Journal of Engineering Materials and Technology, Vol.131 (2009), pp. 011010-1 – 011010-6.
124) Wakako ARAKI, Yoshinori IMAI, Tadaharu ADACHI: Mechanical Stress Effect on Mobility of Oxygen Ion in 8 mol% Yttria-Stabilized Zirconia Electrolyte. Journal of the European Ceramic Society, Vol.29 (2009), pp.2275-2279.
123) Hiroaki NAKAMOTO, Tadaharu ADACHI, Wakako ARAKI: In-Plane Impact Behavior of Honeycomb Structures Filled with Linearly Arranged Inclusions. International Journal of Impact Engineering, Vol. 36 (2009), pp.1019-1026.
122) Hiroaki NAKAMOTO, Tadaharu ADACHI, Wakako ARAKI: In-Plane Impact Behavior of Honeycomb Structures Randomly Filled with Rigid Inclusions. International Journal of Impact Engineering, Vol.36 (2009) pp.73-80.
INTERNATIONAL CONFERENCES
70) Kyouhei SUZUKI, Tadaharu ADACHI, Kikuo KISHIMOTO: Mesoscale Simulation on Mechanical Properteis of Polymer Blend. Proceedings of Asian Pacific Conference for Materials and Mechanics 2009, (2009), Paper ID #A233. (Yokohama, Japan, November 13-16, 2009)
69) Joris PROU, Kikuo KISHIMOTO, Tadaharu ADACHI, Andrei CONSTANTINESCU: Identification of Thin Films Elastic Material Parameters from Indentation Test. Proceedings of Asian Pacific Conference for Materials and Mechanics 2009, (2009), Paper ID #A235. (Yokohama, Japan, November 13-16, 2009)
68) Farid TRIAWAN, Tadaharu ADACHI, Kikuo KISHIMOTO, Tohru HASHIMURA: Evaluation on Elastic Modulus of Closed-Cell Aluminum Alloy Foam. Proceedings of Asian Pacific Conference for Materials and Mechanics 2009, (2009), Paper ID #A238. (Yokohama, Japan, November 13-16, 2009)
67) Joong-Suk KOOK, Jong-Hee YIM, Tadaharu ADACHI: Effect of Manufacturing Process on Mechanical Properties of GFRP Laminates. Proceedings of the 3rd Conference on Manufacturing, Machine Design and Tribology, (2009), p.305.
66) Yoke NUSOM, Nattawoot DEPAIWA, Tadaharu ADACHI, Sompong SRIMANOSAOWAPAK: Development of a Foaming Test Rig for Comparative Study of Foaming Water and Molten Aluminium. Symposium T Abstract Book of International Conference on Materials for Advanced Technologies 2009 and International Union of Materials Research Societies – International Conference in Asia 2009, (2009), p.28-29.
65) Wakako ARAKI, Shogo WADA, Jun IIJIMA, Tadaharu ADACHI, Yoshihiro ARAI: Elastic Modulus of Sol-Gel Silica Glass: Porosity and Skelton Character, Abstracts of XV International Sol-Gel Conference, (2009), p.370.
BOOKS
11) Tadaharu ADACHI: Mechanical Properties of Epoxy Nanocomposites. Review of Epoxy Resin Latest, Recent Advance, (2009), The Japan Society of Epoxy Resin Technology, pp.431-435 (in Japanese).
10) Kikuo KISHIMOTO, Kentaro KOZUKI, Tadaharu ADACHI: Measurement of Interfacial Strength of Thin Polymer Coating by Nano-Indentation Method. Micromaterials and Nanomaterials, Issues 9 (2009), pp. 26-29.
9) Tadaharu ADACHI et al. (Editor and author): Strain Measurement III, (2009), Japan Society of Non-Destructive Inspection (in Japanese).
8) Tadaharu ADACHI: Energy Absorption of Axially-Impacted Column Controlled by Transverse Impact. Mechanics and Model-Based Control of Smart Materials and Structures, (2009), Springer, pp.1-10.
7) Tadaharu ADACHI et al. (Editor and author): Strain Measurement, Excercise Book, (2009), Japan Society of Non-Destructive Inspection (in Japanese).
INVITED LECTURE
Tadaharu ADACHI: Development of Measurement System for Residual Stress in a Sphere by Resonant Ultrasound Spectroscopy. at BK21 Project Corp. Education Center of Mold Technology for Advanced Materials & Parts, Chosun University，(August 21, 2009).
2008
ORIGINAL PAPERS
121) Andi HARIS, Tadaharu ADACHI, Wakako ARAKI: Nano-Scale Characterization of Fracture Surfaces of Blended Epoxy Resins Related to Fracture Properties. Materials Science and Engineering Part A, Vol.496, (2008), pp.337-344.
120) Wakako ARAKI, Hiroyuki NORIGOE, Tadaharu ADACHI: Mechanical Properties of Scandia Stabilized Zirconia with Alumina Addition. Key Engineering Materials, Vols.385-387 (2008), pp.441-444.
119) Andi HARIS, Tadaharu ADACHI, Wakako ARAKI: Viscoelasticity and Fracture Toughness of Blended Epoxy Resins Containing Two Monomers with Different Molecular Weights. Journal of Materials Science, Vol.43, (2008), pp.3289-3295.
118) Tadaharu ADACHI, Mayuka OSAKI, Wakako ARAKI, Soon-Chul KWON: Fracture Toughness of Nano- and Micro-Spherical Silica-Particle-Filled Epoxy Composites. Acta Materialia, Vol.56 (2008) pp.2101-2109.
117) Hiroaki NAKAMOTO, Tadaharu ADACHI, Wakako ARAKI: Energy Absorption of Honeycomb Randomly Filled with Inclusions Subjected to In-Plane Impact. Journal of Modern Physics B, No.22, No.9/11 (2008), pp.1343-1348.
116) Tadaharu ADACHI, Hirotaka GOTO, Wakako ARAKI, Takahiro OMORI, Noriyasu KAWAMURA, Minoru MUKAI, Takashi KAWAKAMI: Testing Method for Measuring Impact Strength of BGA Solder Joints on Electrical Package. Journal of Modern Physics B, Vol.22, No.9/11 (2008), pp.1050-1055.
115) Jae-Jung HWANG, Tadaharu ADACHI, Takuro KUWABARA, Wakako ARAKI: Laminate Model Expressing Mechanical Properties of Polypropylene Foams Having Non-Uniform Cell-Shape Distributions. Materials Science and Engineering Part A, Vol.487 (2008) pp.369-376.
114) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI: Temperature Dependence of Fracture Toughness of Silica/Epoxy Composites: Related to Microstructure of Nano- and Micro-Particles Packing. Composites Part B, Vol.39 (2008), p.773-781.
113) Wakako ARAKI, Shogo WADA, Tadaharu ADACHI: Viscoelasticity of Epoxy Resin/Silica Hybrid Materials with an Acid Anhydride Agent. Journal of Applied Polymer Science, Vol.108 (2008), pp.2421-2427.
112) Wakako ARAKI, Tadaharu ADACHI: Viscoelasticity of Epoxy Resin/Silica Hybrid Material Prepared via Sol-Gel Process: Considered in Term of Morphology. Journal of Applied Polymer Science, Vol.107 (2008), pp.253-261.
111) Wakako ARAKI, Takahiro KAMIKOZAWA, Tadaharu ADACHI: Determination of Residual Stress in Spherical Balls by Resonant Ultrasound Spectroscopy. NDT & E International, Vol.41 (2008), pp.82-87.
110) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Effect of Composing Particles of Two Sizes on Mechanical Properties of Spherical Silica-Particulate-Reinforced Epoxy Composites. Composites, Part B, Vol. 39 (2008), pp.740-746.
109) Tadaharu ADACHI, Atsuo TOMIYAMA, Wakako ARAKI, Akihiko YAMAJI: Energy Absorption of a Thin-Walled Cylinder with Ribs Subjected to Axial Impact. International Journal of Impact Engineering, Vol.35, (2008) pp.65-79.
INTERNATIONAL CONFERENCES
64) Wakako ARAKI, Shogo WADA, Tadaharu ADACHI: Morphology and Viscoelasticity of Hybrid Nanocomposites Prepared via Sol-Gel Process. Proceedings of the US-Japan Conference on Composite Materials 2008, (2008), p.NAN-7-1-NAN-7-6.
63) Tadaharu ADACHI: Consideration of mixture law for fracture toughness of nanospherical silica-particle-filled epoxy composites. 1st Japan – Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures (September 22, 2008), Linz, Austria.
62) Tadaharu ADACHI: Particle Size Effect on Fracture Toughness of Nano-Spherical Particle Filled Composites. Proceedings of the Asian Conference on Mechanics of Functional Materials and Structures, (2008), pp.369-372.
61) Andi HARIS, Tadaharu ADACHI, Wakako ARAKI: Mechanical Properties of Cured Epoxy Resins Containing Two Monomers with Different Molecular Weights. Book of Extended Abstracts, Asian Workshop on Polymer Processing in Japan, (2008), pp.75-78.
60) Wakako ARAKI, Yoshinori IMAI, Tadaharu ADACHI: Effect of Macroscopic Tensile Stress on Ionic Conductivity of Polycrystalline Ziroconia Stabilized with Yittria. 2008 MRS Fall Meeting Abstracts, (2008), CD-ROM O5.4.
BOOK
6) Tadaharu ADACHI, et al. (author), Latest Filler Technology, (2008), Technical Information Institute, pp. 503-515 (in Japanese).
SURVEY, OTHER
Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Study on Solid Oxide Fuel Cell from Mechanical Standpoints. The Journal of Fuel Cell Technology, Vol.8, No.2, (2008), pp.123-127. (in Japanese).
Tadaharu ADACHI et al.: Glossary of Standard Terms for Stress and Strain Measurements. Standards of the Japanese Society for Non-Destructive Inspection (NDIS) 4001-2008, (2008), The Japanese Society of Non-Destructive Inspection.
2007
ORIGINAL PAPERS
108) Andi HARIS, Tadaharu ADACHI, Yu HAYASHI, Wakako ARAKI: Material Characterization of Blended Epoxy Resins Related to Fracture Toughness. Journal of Materials Science, Vol. 42 (2007), pp. 9859-9866.
107) Andi HARIS, Tadaharu ADACHI, Wakako ARAKI, Yu HAYASHI: Fracture Toughness of Epoxy Resins Containing Blends of Monomers with Different Molecular Weights. Key Engineering Materials, Vols. 345-346 (2007) pp. 1511-1514.
106) Jae-Jung HWANG, Tadaharu ADACHI, Wakako ARAKI: Time-Temperature Dependence on Compressive Behavior of Polypropylene foams. Key Engineering Materials, Vols. 345-346 (2007) pp. 153-156.
105) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Mechanical Properties of Nano/Micro-Silica Particles Bidispersed Epoxy Composites. Key Engineering Materials, Vols.345-346 (2007) pp. 1507-1510.
104) Wakako ARAKI, Tadaharu ADACHI: Morphology and Viscoelasticity of Organic/Inorganic Hybrid Nanocomposite. Key Engineering Materials, Vols.345-346 (2007) pp. 1515-1518.
103) Seung-Min JANG, Tadaharu ADACHI, Akihiko YAMAJI: Initiation and Propagation of Impact-Induced Damage in CFRP Laminates. Key Engineering Materials, Vols. 345-346 (2007) pp. 437-440.
102) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Prediction of Fracture Initiation in Thermo-Viscoelastic Material. Journal of Thermal Stresses, Vol.30, (2007), pp. 459-474.
101) Soon-Chul KWON, Tadaharu ADACHI: Strength and Fracture Toughness of Nano and Micron-Silica Particles Bidispersed Epoxy Composites: Evaluated by Fragility Parameter. Journal of Materials Science, Vol.42 (2007) pp.5516-5523.
INTERNATIONAL CONFERENCES
59) Wakako ARAKI, Tadaharu ADACHI: Mechanical Effect on Oxygen Mobility in Yttria Stabilized Zirconia. Materials Research Society Symposium Proceedings, Vol.1041E, (2007) #1041-R03-02.
58) Andi HARIS, Tadaharu ADACHI, Wakako ARAKI, Yu HAYASHI: Fracture Toughness of Epoxy Resin Containing Blends of Monomers with Differential Molecular Weights. The 10th International Conference on Mechanical Behavior of Materials Abstracts, (2007), p.119.
57) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Mechanical Properties of Nano/Micro Silica Particles Bidispersed Epoxy Composites. The 10th International Conference on Mechanical Behavior of Materials Abstracts, (2007), p.119.
56) Wakako ARAKI, Tadaharu ADACHI: Morphology and Viscoelasticity of Organic/Inorganic Hybrid Nanocomposite. The 10th International Conference on Mechanical Behavior of Materials Abstracts, (2007), p.120.
55) Jae-Jung HWANG, Tadaharu ADACHI, Wakako ARAKI: Time-Temperature Dependence of Compressive Behavior of Polypropylene Foams. The 10th International Conference on Mechanical Behavior of Materials Abstracts, (2007), p.165.
54) Seung-Min JANG, Tadaharu ADACHI, Akihiko YAMAJI: Initiation and Propagation of Impact-Induced Damage in CFRP Laminates. The 10th International Conference on Mechanical Behavior of Materials Abstracts, (2007), p.177.
53) Wakako ARAKI, Takahiro KAMIKOZAWA, Tadaharu ADACHI: Determination of Residual Stress in Spherical Balls by Resonant Ultrasound Spectroscopy. Euromat 2007, (2007), D22-1985.
52) Wakako ARAKI, Shogo WADA, Tadaharu ADACHI: Epoxy Resin/Silica Hybrid Material Manufactured by Sol-Gel Process with Acid Anhydride. Euromat 2007, (2007), D22-1985.
51) Hiroaki NAKAMOTO, Tadaharu ADACHI, Wakako ARAKI: Energy Absorption of Honeycomb Randomly Filled with Inclusions Subjected to In-Plane Impact. Sixth International Symposium on Impact Engineering Abstract Book, (2007), p.155.
50) Tadaharu ADACHI, Wakako ARAKI, Hirotaka GOTO, Takahiro OMORI, Takashi KAWAKAMI, Noriyasu KAWAMURA, Mironu MUKAI: Testing Method for Measuring Impact Strength of BGA Solder Joints on Electronic Package. Sixth International Symposium on Impact Engineering Abstract Book, (2007), p.180.
BOOKS
5) Tadaharu ADCHI et al.: Mathematics for Mechanical Engineering, (2007), Asakura (in Japanese).
4) Tadaharu ADACHI et al. (Editor and author): Strain Measurement I, (2007), Japan Society of Non-Destructive Inspection (in Japanese).
3) Tadaharu ADACHI et al. (Editor and author): Strain Measurement II, (2007), Japan Society of Non-Destructive Inspection (in Japanese).
INVITED LECTURE
Tadaharu ADACHI: Mechanical Properties of Nano- and Micro-Particles Filled Composites. at BK21 Project Corp. Education Center of Mold Technology for Advanced Materials & Parts, Chosun University，(September 20, 2007).
2006
ORIGINAL PAPERS
100) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Thermo-viscoelastic Properties of Silica Particulate Reinforced Epoxy Composites: Considered in terms of Particle Packing Model. Acta Materialia, Vol.54 (2006), pp.3369-3374.
99) Azhari SASTRANEGARA, Tadaharu ADACHI, Akihiko YAMAJI: Effect of Transverse Impact on Buckling Behavior of Compressed Column. Thin-Walled Structure, Vol.44 (2006), pp. 701-707.
98) Seung-Min JANG, Tadaharu ADACHI, Akihiko YAMAJI: Damage Development in CFRP Laminates under Impact Loading. Key Engineering Materials, Vols. 326-328 (2006) pp. 1833-1836.
97) Joong-Suk KOOK, Tadaharu ADACHI: Mechanical Properties of GFRP Laminates Manufactured by Process Combined with Wet Lay-up and Vacuum Curing. Key Engineering Materials, Vols.306-308 (2006), pp.845-850.
BOOK
2) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Fracture Behaviour of Thermo-Viscoelastic Materials: Epoxy Resin and Its Composite. Recent Research Development in Applied Polymer Science, Vol.3 (2006), pp.205-242.
2005
ORIGINAL PAPERS
96) Jae-Jung HWANG, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Compression Characteristics of Paper and Coated Paper. Key Engineering Materials, Vols.297-300 (2005), pp.178-182.
95) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Effect of Particle Size on Fracture Toughness of Spherical-Silica Particle Filled Epoxy Composites. Key Engineering Materials, Vols.297-300 (2005), pp.207-212.
94) Tadaharu ADACHI, Yasunori KONDO, Akihiko YAMAJI, Soon-Ho YANG, In-Young YANG: Nondestructive Evaluation of Micro-Cracks in a Ceramic Ferrule by Resonant Ultrasound Spectroscopy. NDT & E International, Vol.38 (2005), pp.548-553.
93) Akiko YAOITA, Tadaharu ADACHI, Akihiko YAMAJI: Determination of Elastic Moduli for a Spherical Specimen by Resonant Ultrasound Spectroscopy. NDT & E International, Vol.38 (2005), pp.554-560.
92) Azhari SASTRANEGARA, Tadaharu ADACHI, Akihiko YAMAJI: Improving Energy Absorption of Impacted Column due to Transverse Impact: Finite Element Analysis. International Journal of Impact Engineering, Vol.32 (2005), pp.444-460.
91) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Thermal Stress Analysis of Thermoviscoelastic Hollow Cylinder with Temperature-Dependent Thermal Properties. Journal of Thermal Stresses, Vol.28, (2005), pp.29-46.
90) Wakako ARAKI, Kentaro NEMOTO, Tadaharu ADACHI, Akihiko YAMAJI: Fracture Toughness for Mixed Mode I/II of Epoxy Resin. Acta Materialia, Vol.53 (2005), pp.869-875.
89) Wakako ARAKI, Daisuke ASAHI, Tadaharu ADACHI, Akihiko YAMAJI: Time-Temperature Dependency of Mode II Fracture Toughness for Bisphenol A-Type Epoxy Resin. Journal of Applied Polymer Science, Vol.96, (2005), pp.51-55.
88) Azhari SASTRANEGARA, Tadaharu ADACHI, Akihiko YAMAJI: Improvement of Energy Absorption of Impacted Column due to Transverse Impact. International Journal of Impact Engineering, Vol.31 (2005), pp.483-496.
INTERNATIONAL CONFERENCES
49) Joong-Suk KOOK, Tadaharu ADACHI: Mechanical Properties of GFRP Laminates Manufactured by Process Combined with Wet Lay-up and Vacuum Curing. Proceeding of the 6th International Conference on Fracture and Strength of Solids 2005, (2005), pp.847-852.
48) Akihiko YAMAJI, Tadaharu ADACHI,Jyunsuke TAKAHASHI, Wakako ARAKI: Proton Conduction and Fuel Cell Performance of Sintered SiO2 Solid Electrolyte Formed on Single Crystal Silicon Wafer. Abstracts of 2005 MRS Fall Meeting, (2005), p.27.
BOOK
1) Tadaharu ADACHI et al.: JSME Mechanical Engineers’ Handbook Fundamentals a3 Materials and Mechanics, (2005), p. 15, Japan Society of Mechanical Engineers (in Japanese).
SURVEY
Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Microstructure and Fracture Toughness of an Epoxy Resin and Its Composite. Journal of Network polymer, Japan, Vol.26, No.3 (2005), pp.167-173. (in Japanese).
2004
ORIGINAL PAPERS
87) Tadaharu ADACHI, Tsuyoshi TAKEMOTO, Wakako ARAKI, Akihiko YAMAJI: Impact Energy Absorption of Thin-Walled Cylinders with Ribs. Journal of the Society of Materials Science Japan, Vol.53, No.3 (2004), p.241-246 (in Japanese).
86) Masahiro ARAI, Toru TAKAGI, Toshikazu KUWAHARA, Tadaharu ADACHI: Evaluation of Interlaminer Fracture Toughness of Cross-ply CFRP Laminates Using Mixed Mode Bending Test. Transactions of the JSME (Series A), Vol.70, No.698, (2004), pp.1356-1363 (in Japanese).
85) Tadaharu ADACHI, Testuya TANAKA, Azhari SASTRANEGARA, Akihiko YAMAJI, Sun-Kyu KIM, In-Young YANG: Effect of Transverse Impact on Buckling Behavior of a Column under Static Axial Compressive Force. International Journal of Impact Engineering, Vol.30 (2004), pp.465-475.
INTERNATIONAL CONFERENCES
47) Azhari SASTRANEGARA, Tadaharu ADACHI, Akihiko YAMAJI: Energy Absorption of Impacted Column Controlled by Transverse Impact. Proceedings of the Regional Conference on Aeronautical Science, Technology and Industry (RC-ASTI) 2004, (2004), pp. 149-158.
46) Azhari SASTRANEGARA, Tadaharu ADACHI, Akihiko YAMAJI: Applying Transverse Impact for Improving Energy Absorption of Axially Impacted Column. Abstracts of Fifth International Symposium on Impact Engineering, (2004), p.28.
45) Tadaharu ADACHI, Tsuyoshi TAKEMOTO, Wakako ARAKI, Akihiko YAMAJI: Impact Energy Absorption of Thin-Walled Cylinders with Ribs. Abstracts of Fifth International Symposium on Impact Engineering, (2004), p.121.
44) Soon-Chul KWON, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Effect of Particle Size on Fracture Toughness of Spherical Silica Particles Filled Epoxy Composite. Program & Abstracts of Asian Pacific Conference for Fracture and Strength ‘04, (2004), p.116.
43) Jae-Jung HWANG, Tadaharu ADACHI, Wakako ARAKI, Akihiko YAMAJI: Compression Characteristics of Paper and Coated Paper. Program & Abstracts of Asian Pacific Conference for Fracture and Strength ‘04, (2004), p.367.
42) Akihiko YAMAJI, Atsushi SEGAWA, Tadaharu ADACHI, Wakako ARAKI: Proton Conduction and Fuel Cell Performance of Sintered SiO2 Solid Electrolyte. Abstracts of 2004 MRS Fall Meeting, (2004), p.288.
2003
ORIGINAL PAPERS
84) Seung-Min JANG, Tadaharu ADACHI, Akihiko YAMAJI: Impact Damage Resistance of CFRP Laminate with Epoxy-Resin Surface Layer. Materials Science Research International, Vol.9, No.2 (2003), pp.138-142.
83) Sun-Kyu KIM, Kwang-Hee IM, Young-Nam KIM, Jae-Woung PARK, In-Young YANG, Tadaharu ADACHI: On the Characteristics of Energy Absorption Control in Thin-Walled Members for the Use of Vehicular Structures. Key Engineering Materials, Vols. 233-236, (2003), p.239-244.
82) Tadaharu ADACHI, Mayuka OSAKI, Akihiko YAMAJI, Masahiro GAMOU: Time-Temperature Dependence of the Fracture Toughness of a Poly (Phenylene Sulphide) Polymer. Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, Vol.217, No.1 (2003), pp.29-34.
81) Masahiro ARAI, Yoshihiro SATO, Tadaharu ADACHI: Elastodynamic Crack Analysis by Boundary Element Method Using Numerical Inversion of Laplace Transform. JSME International Journal, Series A (Mechanics and Material Engineering), Vol.46, No.2 (2003), pp.131-139.
80) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Time-Temperature Dependences of Fracture Toughnesses of Epoxy Resin and Silica Particulate-Filled Epoxy Composite. Material Science Forum, Vols.426-432, (2003), pp.1985-1990.
79) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Fracture Toughnesses of Bisphenol a Type Epoxy Resin and Silica Particulate-Filled Epoxy Composite. JSME International Journal, Series A (Mechanics and Material Engineering), Vol.46, No.2 (2003), pp.163-169.
2002
ORIGINAL PAPERS
78) Wakako ARAKI, Tadaharu ADACHI, Masahiro GAMOU, Akihiko YAMAJI: Time-Temperature Dependence of Fracture Toughness for Bisphenol A Epoxy Resin. Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, Vol.216, No.2 (2002), pp.79-84.
77) Seung-Min JANG, Tadaharu ADACHI, Akihiko YAMAJI, Joong-Suk KOOK: Comparing Damage in CFRP Laminates due to Soft Body and Hard Body Impacts. Materials Science Research International, Vol.8, No.3 (2002), pp.151-155.
76) Tadaharu ADACHI, Wakako ARAKI, Takuya NAKAHARA, Akihiko YAMAJI, Masahiro GAMOU: Fracture Toughness of Silica Particulate-Filled Epoxy. Journal of Applied Polymer Science, Vol.86, (2002), pp.2261-2265.
75) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI, Masahiro GAMOU: Fracture Toughness of Bisphenol A-Type Epoxy Resin. Journal of Applied Polymer Science, Vol.86, (2002), pp.2266-2271.
INTERNATIONAL CONFERENCES
41) Wakako ARAKI, Tadaharu ADACHI, Akihiko YAMAJI: Fracture Toughnesses of Bisphenol-A Type Epoxy Resin and Silica Particulate-Filled Epoxy Composite. Proceedings of the Intentional Symposium on Experimental Mechanics, (2002), CD-ROM, Paper No.D184.
40) Seung-Min JANG, Tadaharu ADACHI, Akihiko YAMAJI: Effect of Surface Coating on Resistance of Impact Damage in CFRP Laminates. Proceedings of the Intentional Symposium on Experimental Mechanics, (2002), CD-ROM, Paper No.A185.
2001
ORIGINAL PAPERS
74) Masahiro ARAI, Tadaharu ADACHI: Application of Numerical Laplace Inversion for the Elastodynamic BEM Analysis. Transactions of Japan Society for Computational Methods in Engineering, Vol.1 (2001), pp.49-54 (in Japanese).
73) Masahiro ARAI, Toru NISHIDA, Tadaharu ADACHI: Identification of Dynamic Pressure Distribution Applied to the Elastic Thin Plate. Transactions of the JSME (Series A), Vol.67, No.662, (2001), pp.1680-1687 (in Japanese).
72) Masahiro ARAI, Toru NISHIDA, Tadaharu ADACHI: Identification of Transverse Pressure Distribution Applied to the Elastic Thin Plate. Transactions of the JSME (Series A), Vol.67, No.655, (2001), pp.405-412 (in Japanese).
71) Toru TAKAGI, Masahiro ARAI, Satoshi NADAYOSHI, Tadaharu ADACHI: Boundary Element Analysis for Interlaminer Fracture Toughness of Orthotropic-Dissimilar Interface Crack. Transactions of the JASCOME, Journal of Boundary Element Methods, VOl.18 (2001), pp.39-42.
INTERNATIONAL CONFERENCES
39) Tadaharu ADACHI, Taro IKETAKI, Masahiro GAMOU, Akihiko YAMAJI: Time-Temperature Dependence on Fracture Toughness of Silica Particulate-Filled Epoxy Composite. Proceedings of the Fourth International Congress on Thermal Stresses, (2001), pp.65-68.
38) Wakako ARAKI, Tadaharu ADACHI, Masahiro GAMOU, Akihiko YAMAJI: Effect of Curing State on Fracture Toughness of Epoxy Resin. Proceedings of the Fourth International Congress on Thermal Stresses, (2001), pp.215-218.
37) Masayoshi SHIMIZU, Tadaharu ADACHI, Takahito GOSHIMA: Temperature Dependence of Damages in CFRP Laminates Subjected to Collision of Steel Ball. Proceedings of the Fourth International Congress on Thermal Stresses, (2001), pp.371-374.
36) Masahiro ARAI, Satoshi OSHIMA, Tadaharu ADACHI: Identification of Boundary Condition for the Thin Plate Bending Problems. International Symposium on Inverse Problems in Engineering Mechanics, Nagano, Japan (2001), pp.29-32.
35) Sun-Kyu KIM, Kwang-Hee IM, In-Young YANG, Tadaharu ADACHI: Energy Absorption Control of Vehicular-Structure Members. Impact Engineering and Application, Proceedings of the 4th International Symposium Impact Engineering (Edited by A. Chiba, S. Tanimura, K. Hokamoto), Vol.2, (2001), pp.815-820.
34) Sun-Kyu KIM, Kwang-Hee IM, In-Young YANG, Tadaharu ADACHI: Energy Absorption Control of Vehicular-Structure Members. Fourth International Symposium on Impact Engineering, Kumamoto 2001, ISIE/4 Abstracts, (2001), p.96.
33) Akihiko YAMAJI, Kenji TOJYUI and Tadaharu ADACHI: Oxygen-Ion Diffusion and Ionic Conductivity in Ba2In2-xGaxO5. 2001 MRS Fall Meeting Abstracts, (2001), p.314.
32) Akihiko YAMAJI, Eiichi NAKAMURA, Tadaharu ADACHI: Oxygen-Ion Diffusion in Polycrystalline La2-xSrxCuO4-d. US-Japan Workshop on HTS Program Abstracts,(2001) p.2B5
2000
ORIGINAL PAPERS
70) Joong-Suk KOOK, In-Young YANG, Tadaharu ADACHI: Characteristics of Delamination in Graphite/Epoxy Laminates under Static and Impact Loads. Key Engineering Materials, Vols. 183-187 (2000), pp.731-736.
69) Masahiro ARAI, Motoaki KAMIMURA, Tadaharu ADACHI, Akihiko YAMAJI: Application of Boundary Element Method for Resonant Ultrasound Spectroscopy. Proceedings to the 17th Japan National Symposium on Boundary Element Methods, Vol.17 (2000), pp.29-32 (in Japanese).
68) Masahiro ARAI, Yoshikazu IWASAKI, Tadaharu ADACHI, Akihiko YAMAJI: Fabrication and Characterization of Solid Electrolyte Thin Films Using the Doctor Blade Method. Journal of the Japan Society for Precision Engineering, Vol.66, No.2 (2000), pp.234-238 (in Japanese).
67) Akihiko YAMAJI, Kazuya KAWAKAMI, Masahiro ARAI, Tadaharu ADACHI: Phase Relations and Conductivity in Ba2(In2-xMx)O5 System. Materials Research Society Proceedings, New Materials for Batteries and Fuel Cells (Edited by D.H. Doughty, H-P. Brack, K. Naoi, L.F. Nazar), Vol.575 (2000), pp.343-348.
66) Akihiko YAMAJI, Sayaka MAENO, Mirei TOMIZAWA, Masahiro ARAI, Tadaharau ADACHI: Oxygen-ion Diffusion in YBa2Cu3O7-d Ceramics. Physica C Superconductivity and Its Applications, Vol.335 (2000), pp.264-267.
65) Tadaharu ADACHI, Masahiro ARAI, Naoki SAKABE, Hiroyuki MATSUMOTO: Evaluation of Dynamic Fracture Toughness of Unidirectional CFRP Laminates. JSME International Journal, Series A (Mechanics and Material Engineering), Vol.43, No.2 (2000), pp.179-185.
INTERNATIONAL CONFERENCES
31) Masahiro ARAI, Toru NISHIDA, Tadaharu ADACHI: Identification of Dynamic Pressure Distribution Applying on the Elastic Thin Plate. International Symposium on Inverse Problems in Engineering Mechanics, Nagano, Japan (Edied by M. Tanaka and G.S. Dulikravich), (2000), pp.62-65.
30) Masahiro ARAI, Yoshihiro SATO, Tadaharu ADACHI: Boundary Element Analysis for Unsteady Elastodynamic Crack Problems Based on The Laplace Transform. The 2000 ASME Pressure Vessels and Piping Conference (Fatigue, Fracture, and Damage Analysis) (Edited by K.-K. Yoon), PVP-Vol.404, (2000), Seattle, Washington, pp.149-155.
29) Akihiko YAMAJI, Kenji TOJYU, Tadaharu ADACHI: Oxygen-Ion Diffusion in Ba2In2O5. 2000 MRS Fall Meeting Abstracts, (2000), p.614.
1999
ORIGINAL PAPERS
64) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: An acoustic lens to measure wave velocities with the complex V(z) curve method. NDT & E International, Vol.32, No.4 (1999), pp.219-224.
63) Masahiro ARAI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Boundary Element Analysis for Unsteady Elastodynamic Problems Based on the Laplace Transform. JSME International Journal, Series A (Mechanics and Material Engineering), Vol.42, No.4 (1999), pp.507-514.
62) Masayoshi SHIMIZU, Tadaharu ADACHI, Masahiro ARAI, Takuya NAKAHARA, Hiroyuki MATSUMOTO: Thermoviscoelastic Stress Analysis of a CFRP Laminate Subjected to Impulsive Load. Transactions of the JSME (Series A), Vol.65, No.638, (1999), pp.2066-2066 (in Japanese).
61) Masahiro ARAI, Motoaki KAMIMURA, Tadaharu ADACHI, Akihiko YAMAJI: Estimation of Interlaminar Fracture Toughnesses for Orthogonal CFRP Laminate (Boundary Element Analysis of Interface Crack between Dissimilar Orthotropic Material). Transactions of the JSME (Series A), Vol.65, No.639, (1999), pp.2238-2245 (in Japanese).
60) Tadaharu ADACHI, Satoshi YAMAMURA, Masahiro ARAI, Hiroyuki MATSUMOTO: Approximated Evaluation of Load History by Soft Impact Body. Transactions of the JSME (Series A), Vol.65, No.635, (1999), pp.1615-1621 (in Japanese).
59) Masayoshi SHIMIZU, Tadaharu ADACHI, Masahiro ARAI, Takuya NAKAHARA, Hiroyuki MATSUMOTO: Influence of Thermal Environment on Mode I and Mode II Interlaminar Fracture Toughness in Unidirectional CFRP Laminates. Transactions of the JSME (Series A), Vol.65, No.630 (1999), pp.282-286 (in Japanese).
58) Masahiro ARAI, Satoshi OSHIMA, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Identification of Boundary Condition for Elastostatic Thin Plate Bending Problems (1st Report, BEM Analysis of Inverse Problems for Boundary Values). Transactions of the JSME (Series A), Vol.65, No.632 (1999), pp.708-715 (in Japanese).
57) Masahiro ARAI, Satoshi OSHIMA, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Identification of Boundary Condition for Elastostatic Thin Plate Bending Problems (2nd Report, Introduction of Boundary Relations Using Influence Functions). Transactions of the JSME (Series A), Vol.65, No.632 (1999), pp.716-722 (in Japanese)
INTERNATIONAL CONFERENCE
28) Tadaharu ADACHI, Satoshi YAMAMURA, Masahiro ARAI, Hiroyuki MATSUMOTO: Approximated Evaluation of Load History by Soft-Body Impact. Impact Response of Materials and Structures, 3rd International Symposium on Impact Engineering (Edited by V.P.W. Shim, S. Tanimura and C.T. Lim), (1999), pp.467-474, Oxford.
1998
ORIGINAL PAPERS
56) Masahiro ARAI, Koji SHIBATA, Tadaharu ADACHI: Analysis of Residual Stress in Thermo-Viscoelastic Materials by Boundary Element Method. Proceedings to the 15th Japan National Symposium on Boundary Element Methods, Vol.15 (1998), pp.29-34 (in Japanese).
55) Masahiro ARAI, Yasuhiro TATEISHI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Finite Element Analysis for Damage Propagation of CFRP Laminated Beam. Transactions of the JSME (Series A), Vol.64, No.627 (1998), pp.2686-2693 (in Japanese).
54) Masahiro NISHIDA, Kenichi MAEDA, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurement of Elastic Moduli, Density and Thickness of Thin Film by Dispersion Curves of Two Kinds of Surface Waves. Transactions of the JSME (Series A), Vol.64, No.620 (1998), pp.1000-1006 (in Japanese).
43′) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurement of Anisotropic Elastic Moduli in Local Area by Acoustic Microscope (The Case of Cubic Single Crystal). JSME International Journal, Series A (Mechanics and Material Engineering), Vol.41, No.3 (1998), pp.430-438.
INTERNATIONAL CONFERENCE PAPERS
27) Masahiro ARAI, Tadaharu ADACHI, Hiroyuki MATSUMOTO, Tomohei KOBAYASHI: Mode II Dynamic Fracture Toughness of Unidirectional CFRP Laminates. Proceedings of the 11th International Conference on Experimental Mechanics (Edited by I.M. Allison), (1998), pp.1375-1379.
26) Masayoshi SHIMIZU, Tadaharu ADACHI, Masahiro ARAI, Hiroyuki MATSUMOTO: Anisotropic Thermoviscoelastic Constitutive Equation of FRP. Proceedings of the 11th International Conference on Experimental Mechanics (Edited by I.M. Allison), (1998), pp.1387-1392.
25) Tadaharu ADACHI, Satoshi YAMAMURA, Masahiro ARAI, Hiroyuki MATSUMOTO: Approximated Evaluation of Load History by Soft-Body Impact. 3rd International symposium on Impact Engineering ’98 Sourvenir Programme and Abstracts, (1998), p.50
1997
ORIGINAL PAPERS
53) Hideo MORITA, Tadaharu ADACHI, Yasuhiro TATEISHI, Hiroyuki MATSUMOTO: Characterization of Impact Damage Resistance of CF/PEEK and CF/Toughened Epoxy Laminates under Low Velocity Impact Tests. Journal of Reinforced Plastics and Composites, Vol.16, No.2 (1997), pp. 131-143.
52) Yoshibumi NAKAHARA, Jun KITAGAWA, Tadaharu ADACHI, Toshitada YOSHIOKA: The Meaning of Bone Mineral Density by Ultrasonic Method and Its Betterment. Descente Sports Science, Vol.18 (1997), pp.81-88 (in Japanese).
51) Sadayuki UJIHASHI, Katsunori TANAKA, Hiroyuki MATSUMOTO, Tadaharu ADACHI: Estimating Method of the Impact Strength of FRP Plates by Drop Weight Tests. Transactions of the JSME (Series A), Vol.63, No.616 (1997), pp. 2560-2567 (in Japanese).
50) Hideo MORITA, Tadaharu ADACHI, Hiroyuki MATSUMOTO, P.H. Wilson TSANG: Effects of Impact Conditions and Stacking Sequence on Impact Damage in CF/PEEK Laminates. Transactions of the JSME (Series A), Vol.63, No.613 (1997), pp. 2025-2031 (in Japanese).
49) Tadaharu ADACHI, Masahiro ARAI, Naoki SAKABE, Hiroyuki MATSUMOTO: Evaluation of Dynamic Fracture Toughness of Unidirectional CFRP Laminates. Transactions of the JSME (Series A), Vol.63, No.616 (1997), pp. 2568-2574 (in Japanese).
48) Takahiro SOGO, Sadayuki UJIHASHI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Analysis of Energy Absorption Abilities of Thin-Walled Tubes by Impact Axial Crushing. Transactions of the JSME (Series A), Vol.63, No.605 (1997), pp. 146-151 (in Japanese).
47) Masahiro ARAI, Mitsuhiro IZUMI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Analysis of Elastostatic Crack Problems by Boundary Element Method. Transactions of the JSME (Series A), Vol.63, No.605 (1997), pp. 53-60 (in Japanese).
46) Masahiro ARAI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Elastodynamic Thin Plate Bending Analysis by Boundary Element Method with Laplace Transform. JSME International Journal, Series A (Mechanics and Material Engineering), Vol.40, No.1(1997), pp 65-74.
45) Masayoshi SHIMIZU, Tadaharu ADACHI, Masahiro ARAI, Hiroyuki MATSUMOTO: Influence of Temperature on Impact Damage in CFRP Laminates. Transactions of the JSME (Series A), Vol.63, No.607 (1997), pp. 603-609 (in Japanese).
44) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurements of Local Elastic Moduli by Amplitude and Phase Acoustic Microscope. NDT & E International, Vol.30, No.5 (1997), pp. 271-277.
43) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurement of Anisotropic Elastic Moduli in Local Area by Acoustic Microscope (The Case of Cubic Single Crystal). Transactions of the JSME (Series A), Vol.63, No.611, (1997), pp. 1467-1474 (in Japanese).
INTERNATIONAL CONFERENCES
24) Hideo MORITA, Tadaharu ADACHI, Yasuhiro TATEISHI, Hiroyuki MATSUMOTO : Characterization of Impact Damage Resistance of CF/PEEK and CF/Toughened Epoxy Laminates under Low Velocity Impact Tests. Recent Progress on Science & Technology IHI, Vol. 6 (1997), pp. 27-36.
23) Masahiro ARAI, Yasuhiro TATSEISHI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Finite Element Analysis for Damage Propagation of CFRP Laminated Beam. Proceedings of International Conference on Materials and Mechanics ’97, JSME, (1997), pp. 65-66.
22) Masahiro NISHIDA, Kenichi MAEDA, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurement of Mechanical Properties for Thin Film by Amplitude and Phase Acoustic Microscope. Proceedings of International Conference on Materials and Mechanics ’97, JSME, (1997), pp. 391-392.
21) Masahiro NISHIDA, Tohru HIRABAYASHI, Masahiro ARAI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Analysis on Pressure Field of Acoustic Microscope. Proceedings of International Conference on Materials and Mechanics ’97, JSME, (1997), pp. 393-394.
20) Masayoshi SHIMIZU, Takuya NAKAHARA, Tadaharu ADACHI, Masahiro ARAI, Hiroyuki MATSUMOTO: Influence of Thermal Environment on Mode I and Mode II Interlaminar Fracture Toughness in CFRP Lamintes. Proceedings of International Conference on Materials and Mechanics ’97, (1997), JSME, pp. 659-670.
1996
ORIGINAL PAPERS
42) Masahiro ARAI, Tadaharu ADACHI, Katsumi NAKAYAMA, Hiroyuki MATSUMOTO: Highly Accurate Analysis of Elastic Problems by Boundary Element Method. Transactions of the JSME (Series A), Vol.62, No.597 (1996), pp. 1212-1218 (in Japanese).
41) Masahiro ARAI, Tadaharu ADACHI, Hidekazu SUTO, Hiroyuki MATSUMOTO: Identification of Boundary Condition for Beam Subjected to Impulsive Load (Formulation of Boundary Element Method Based on Laplace Transform). Transactions of the JSME (Series A), Vol.62, No.593 (1996), pp. 226-233 (in Japanese).
INTERNATIONAL CONFERENCE
19) Masahiro ARAI, Tadaharu ADACHI, Katsumi NAKAYAMA, Hiroyuki MATSUMOTO: Highly Accurate Elastic Analysis with Non-Singular Integral Equation. Proceedings of the 7th Japan-China Symposium on Boundary Element Methods (Edited by M. Tanaka and Z. Yao), (1996), pp.133-142
OTHER
Tadaharu ADACHI et al.: Natural Frequency Test Methods for Strain-Gauge Type Pressure Transducer. Standards of the Japanese Society for Non-Destructive Inspection (NDIS) 4107-1996, (1996), The Japanese Society of Non-Destructive Inspection.
1995
ORIGINAL PAPERS
40) Tadaharu ADACHI, Mitsuhiro OKAZAKI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Residual Bending Strengths of CFRP Laminates after Impact. JSME International Journal, Series A (Mechanics and Material Engineering), Vol.38,No.3 (1995), pp.370-377.
39) Masahiro ARAI, Tadaharu ADACHI and Hiroyuki MATSUMOTO: Formulation of Double-Layer Potential Method. Transactions of the JSME (Series A), Vol.61, No.585 (1995), pp.993-1000 (in Japanese).
38) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Effects of Couplers on Acoustic Velocity Measurement by Complex V(z) Method. Japanese Journal of Applied Physics, Vol.34, Part 1, No.5B (1995), pp.2869-2873.
37) Takahiro SOGO, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO, Tadaharu ADACHI: Experimental Estimation of Dynamic Plastic Bending Moment for Plastic Hinge Model. Transactions of the JSME (Series A), Vol.61, No.584 (1995), pp.755-759 (in Japanese).
36) Masahiro ARAI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Highly Accurate Analysis by Boundary Element Method Based on Uniform Gradient Condition (Application for Formulation of Classical Potential Problems). Transactions of the JSME (Series A), Vol.61, No.581 (1995), pp.161-168 (in Japanese).
35) Hideo MORITA, Tadaharu ADACHI, Ken NISHIMORI, Akira HAMAMOTO, Hiroyuki MATSUMOTO: Characterization on Impact Damage Resistance of CF/PEEK Laminates under Low and High Velocity Impact Tests. Journal of the Society of Materials Science Japan, Vol.44, No.499 (1995), pp.423-427 (in Japanese).
INTERNATIONAL CONFERENCES
18) Hideo MORITA, Akira HAMAMOTO, Tadaharu ADACHI, Ken NISHIMORI, Hiroyuki MATSUMOTO: Influence of Impact Velocity and Lay-up Parameter on Impact Damage Resistance of CF/PEEK Laminates. 36th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, (1995), pp.1093-1100(AIAA-95-1284-CP).
17) Takahiro SOGO, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO, Tadaharu ADACHI: Experimental Estimation of Dynamic Plastic Bending Moments by Plastic Hinge Models. Impact, Waves, and Fracture (The 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Edited by R.C.Batra, A.K.Mal and G.P.MacSithigh), AMD-Vol.205 (1995), pp.319-326.
16) Hideo MORITA, Tadaharu ADACHI, Yasuhiro TATEISHI, Hiroyuki MATSUMOTO: Characterization of Impact Damage Resistance of CF/PEEK and CF/Toughened Epoxy Laminates under Low Velocity Impact Tests. Proceedings of the American Society for Composites – Tenth Technical Conference, (1995), pp.376-385.
15) Masahiro ARAI, Tadaharu ADACHI , Hiroyuki MATSUMOTO: Regularized Formulation of BEM for Elasto-Dynamic Thin Plate Bending Problems. ASME Joint Applied Mechanics and Materials Summer Conference, AMD-MD ‘95, (1995), pp.500.
14) Takahiro SOGO, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO, Tadaharu ADACHI: Experimental Estimation of Dynamic Plastic Bending Moments by Plastic Hinge Models. ASME Joint Applied Mechanics and Materials Summer Conference, AMD-MD ‘95, (1995), pp.411.
13) Masahiro NISHIDA, Tadaharu ADACHI, Hiroyuki MATSUMOTO, Tomio ENDO: Non-Destructive Measurement of Elastic Moduli in Local Area Using Phase-Sensitive Acoustic Microscope. ASME Joint Applied Mechanics and Materials Summer Conference, AMD-MD ‘95, (1995), pp.321.
1994
ORIGINAL PAPERS
34) Sadayuki UJIHASHI, Yasuharu HIRABARA, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurement and Evaluation of Restitution Characteristics of Golf Balls. Transactions of the JSME (Series C), Vol.60, No.577 (1994), p.3150-3156 (in Japanese).
33) Masahiro ARAI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Formulation of Discretization for the Boundary Element Method Based on Double Layer Potential. Proceedings to the 11th Japan National Symposium on Boundary Element Methods, Vol.11 (1994), pp.25-30 (in Japanese).
32) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Effect of Lens Properties on Measuring Wave Velocities by Scanning Acoustic Microscope. Transactions of the JSME (Series A), Vol.60, No.580 (1994), pp.2885-2890 (in Japanese).
31) Masahiro ARAI, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Highly Accurate Analysis of Thin Elastic Plate Bending Problem by Boundary Element Method (2nd Report; Application of Rigid Rotation Mode for Single Integral Equation Method). Transactions of the JSME (Series A), Vol.60, No.570 (1994), pp.436-442 (in Japanese).
30) In-Young YANG, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Impact Damage in CFRP Laminates under High Temperature. Transactions of the JSME (Series A), Vol.60, No.571 (1994), pp.841-845(in Japanese).
29) Masahiro NISHIDA, Tomio ENDO, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Measurement of Elastic Moduli in Local Area by Scanning Acoustic Microscope. Transactions of the JSME (Series A), Vol.60, No.569 (1994), pp.236-243 (in Japanese).
SURVEY
Koichi EGAWA, Ippei SUSUKI, Shinichi KOSHIDE, Yasufumi FURUYA, Tadaharu ADACHI: Report of the Activities on Smart Material/Structures Research in Japan, Proceedings of 10th International Conference on Experimental Mechanics, Recent Advances in Experimental Mechanics (Ed. by Silvia Gomes J.F., Branco F.B., Martins de Brito F., Gil Saraiva J., Lurdes Eusebio M., Sousa Cirne J. and Correia da Cruz A.), Branco, Lisbo, Portugal, (1994), pp.867-871.
1993
ORIGINAL PAPERS
28) Sadayuki UJIHASHI, Yoshitada ISHII, Tadaharu ADACHI, Michitaka OOTA: Experimental Measurements for Energy Absorption Abilities of Thin-Walled Circular Cylinders by Crushing Due to Impact Loading (On the Method of Measurement and Evaluation). Transactions of the JSME (Series A), Vol.59, No.558 (1993), pp.471-477 (in Japanese).
27) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Dynamic Characteristics of Strain Gauge Type Pressure Transducers (Report 1, Analysis of Frequency Response). Journal of the JSNDI, Vol.42, No.4 (1993), pp.185-192 (in Japanese).
26) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Dynamic Characteristics of Strain Gauge Type Pressure Transducers (Report 2, Effect of Fluid on Natural Frequencies). Journal of the JSNDI, Vol.42, No.5 (1993), pp.251-256 (in Japanese).
25) Masahiro ARAI, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Highly Accurate Analysis for Thin Elastic Plate Bending Plate Problem by Boundary Element Method (1st Report; Regularization for Hyper-Singular Integral by Rigid Rotation Mode). Transactions of the JSME (Series A), Vol.59, No.564 (1993), pp.1860-1867 (in Japanese).
24) Hiroyuki MATSUMOTO, Katsumi NAKAYAMA, Tadaharu ADACHI, Sadayuki UJIHASHI: Impulsive Responses of Framed Structures Using a Matrix Method with Numerical Laplace Transform (2nd Report; Efficient Analysis Based on Substructure Synthesis Method). Transactions of the JSME (Series A), Vol.59, No.566 (1993), pp.2362-2366 (in Japanese).
23) Sadayuki UJIHASHI, Takahiro SOGO, Hiroyuki MATSUMOTO, Tadaharu ADACHI: Energy Absorption Abilities of Thin-Walled Members by Crushing under Impact Loading. Journal of the Society of Materials Science Japan, Vol.42, No.483 (1993), pp.1427-1431 (in Japanese).
9”) Joong Suk KOOK, Masayuki SUZUKI, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Load and Strain Histories for CFRP Laminates under Low Velocity Impact. Key Engineering Materials, Vol. 51-52 (1993), pp.453-458.
INTERNATIONAL CONFERENCES
12) Takahiro SOGO, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO, Tadaharu ADACHI: Energy Absorption Abilities of Thin-Walled Members by Crushing under Impact Loading. The Proceedings of Experimental & Theoretical Mechanics ’93, (1993), pp.327-333, Mechanical Engineering Department, Institute of Technology, Bandung.
11) Hiroyuki MATSUMOTO, Masahiro ARAI, Tadaharu ADACHI: Regularized Formulae of Boundary Element Method for Elastic Problems. The Proceedings of Experimental & Theoretical Mechanics ’93, (1993), pp.22-31, Mechanical Engineering Department, Institute of Technology, Bandung.
10) Masahiro NISHIDA, Tadaharu ADACHI, Hiroyuki MATSUMOTO, Tomio ENDO: Measurement of Elastic Muduli in Local Area by Scanning Acoustic Microscope. The Proceedings of Experimental & Theoretical Mechanics ’93, (1993), pp.290-297, Mechanical Engineering Department, Institute of Technology, Bandung.
9) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Bending Residual Strengths of CFRP Laminates after Impact. The Proceedings of Experimental & Theoretical Mechanics ’93, (1993), pp.201-208, Mechanical Engineering Department, Institute of Technology, Bandung.
1992
ORIGINAL PAPERS
11′) Hiroyuki MATSUMOTO, Yoshihide OGAWA, Tadaharu ADACHI: Stress Analysis of an Orthotopic Laminated Slab Subjected to Transverse Load. JSME International Journal, Series I, Vol.35, No.2 (1992), pp.165-169.
22) Sadayuki UJIHASHI, Jyunichi WATANABE, Tadaharu ADACHI: Development of Measuring System of Ground Reaction Force Distributions by Piezoelectric Transducers. Journal of Japan Society of Sports Industry, Vol.2, No.1 (1992), pp.19-30 (in Japanese).
21) Sadayuki UJIHASHI, Hiroyuki MATSUMOTO, Tadaharu ADACHI, Koji TAGA: Experimental Measurements for Energy Absorption Abilities of Thin-Walled Structures by Crushing Due to Impact Loading. JSAE Review,Vol.13, No.3 (1992), pp.77-79.
9′) Joong Suk KOOK, Masayuki SUZUKI, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Load and Strain Histories for CFRP Laminates under Low Velocity Impact. JSME International Journal, Series I, Vol.35, No.2 (1992), pp.159-164.
INTERNATIONAL CONFERENCE
8) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Measurement of Impulsive Pressure Applied on a Thin Plate by Piezoelectric Transducers. Proceedings of 1st European Conference on Smart Structures and Materials (Ed. by B. Culshaw, P.T. Gardiner and A. McDonach), (1992), pp.193-196, Institute of Physics Publishing.
1991
ORIGINAL PAPERS
20) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Impulsive Responses of a Finite Circular Cylindrical Shell Filled with Fluid Subjected to Axisymmetric Loading. Transactions of the JSME (Series A), Vol.57, No.537 (1991), pp.1123-1128 (in Japanese).
19) Joong-Suk KOOK, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Applicability of Approximated Three-Dimensional Theory to Static Stress Analysis for Orthogonal Laminated Plate. Transactions of the JSME (Series A), Vol.57, No.543 (1991), pp.2653-2658 (in Japanese).
18) Tadaharu ADACHI, Masataka KAWAMURA, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Improvement of the Accuracy of the Dynamic Boundary Element Method by the Partial Integral Method. Transactions of the JSME (Series A), Vol.57, No.536 (1991), pp.946-953 (in Japanese).
17) Tadaharu ADACHI, Kei SAKANOUE, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Estimation of Impact Damage in CFRP Laminates with Compliance Method. Journal of the JSNDI, Vol.40, No.3 (1991), pp.165-170 (in Japanese).
17′) Tadaharu ADACHI, Kei SAKANOUE, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Estimation of Impact Damage in CFRP Laminates with Compliance Method. Transactions of the JSNDI, Vol.4 (1991), pp.33-42.
16) Tadaharu ADACHI, Kei SAKANOUE, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Damage Evaluation of CFRP Laminates Due to Iterative Impact. Transactions of the JSME (Series A), Vol.57, No.535 (1991), pp.569-575 (in Japanese).
15) Hiroyuki MATSUMOTO, Mitsuhiro OKAZAKI, Tadaharu ADACHI, Sadayuki UJIHASHI: Evaluation of Residual Fatigue Strength for Impacted CFRP Laminates (Case of the Four-Point Bending Test). Transactions of the JSME (Series A), Vol.57, No.535 (1991), pp.576-582 (in Japanese).
14) Hiroyuki MATSUMOTO, Masahiro ARAI, Tadaharu ADACHI, Sadayuki UJIHASHI: Evaluation of Perforation Strength for CFRP Laminates. Transactions of the JSME (Series A), Vol.57, No.535 (1991), pp.583-590 (in Japanese).
13) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Measurement of Impulsive Pressure Applied on a Thin Plate by Piezoelectric Transducers. Transactions of the JSME (Series C), Vol.57, No.539 (1991), pp.2223-2227 (in Japanese).
12) Tadaharu ADACHI, Yoshihide OGAWA, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Impulsive Responses of a Circular Cylinder Filled with Fluid Subjected to Uniform Load (Consideration of Fluid-Cylinder Coupling Effect). Transactions of the JSME (Series A), Vol.57, No.536 (1991), pp.918-923 (in Japanese).
11) Hiroyuki MATSUMOTO, Yoshihide OGAWA, Tadaharu ADACHI: Stress Analysis of Orthotopic Laminated Slab Subjected to Transverse Load. Transactions of the JSME (Series A), Vol.57, No.538 (1991), pp.1419-1422 (in Japanese).
10) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Impulsive Responses of a Circular Cylindrical Shell Subjected to Waterhammer Waves. Journal of Pressure Vessel Technology, Vol.113, No.4 (1991), pp.517-523.
INTERNATIONAL CONFERENCE
7) Sadayuki UJIHASHI, Masahiro NISHIDA, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Application of an Alternative Measuring System to Determine the Mechanical Properties of Composites under Impact. Proceedings of 6th Conference, Composite Structures 6 (Ed. by Marshall I.H.), (1991), pp.599-616, Elsevier Applied Science.
1990
ORIGINAL PAPERS
9) Joong Suk KOOK, Masayuki SUZUKI, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Load and Strain Histories for CFRP Laminates under Low Velocity Impact. Transactions of the JSME (Series A), Vol.56, No.532 (1990), pp.2520-2525 (in Japanese).
8) Tadaharu ADACHI, Keiji HATANO, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Impulsive Responses of Framed Structures Using a Matrix Method with a Numerical Laplace Transform (1st Report, A Case of Structures Consisting of Straight-Bar Elements). Transactions of the JSME (Series A), Vol.56, No.524 (1990), pp.917-923 (in Japanese).
7) Hiroyuki MATSUMOTO, Tadaharu ADACHI, Yoshitaka KAKUHAMA, Kei-ichi FUKUZAWA: Analysis of the Dynamic Stress Concentration Factor by the Two-Dimensional Boundary Element Method. JSME International Journal, Series I, Vol.33, No.1 (1990), pp.37-43.
INTERNATIONAL CONFERENCES
6) Sadayuki UJIHASHI, Kei SAKANOUE, Tadaharu ADACHI, Hiroyuki MATSUMOTO: Experimental Measurement of the Mechanical Properties of Fibre-Reinforced Plastics under Impact Loading. Proceeding of the Institution of Mechanical Engineers Fourth International Conference FRC’90 Fibre Reinforced Composites, (1990), pp.157-162, IMechE.
5) Hiroyuki MATSUMOTO, Tadaharu ADACHI, Sadayuki UJIHASHI: Static and Impact Induced Damage of CFRP Laminates. Dynamic Fracture, Proceedings of Oji International Seminar on Dynamic Fracture (Ed. by Homma H. and Kanto Y.), (1990), pp.174-182, Chuo Technical Drawing Co. Ltd.
4) Tadaharu ADACHI, Kei-ichiro SATOH, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO, Katsuyoshi KITAGAWA: Boundary Element Analysis of Plates Subjected to Static and Impulsive Loads. Advances in Boundary Elements Methods in JAPAN and USA, Topics in Engineering (Ed. by Tanaka M., Brebbia C.A. and Shaw R.), Vol.7, (1990), pp.153-165, Computer Mechanics Publications.
3) Joong Suk KOOK, Masayuki SUZUKI, Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Load and Strain Histories for CFRP Laminates under Low Velocity Impact. Proceedings of the KSME/JSME Joint Conference FRACTURE AND STRENGTH’90, (1990), pp.595-600.
1989
ORIGINAL PAPERS
6) Hiroyuki MATSUMOTO, Tadaharu ADACHI, Setsuo YOSHIDA, Sadayuki UJIHASHI: Analytical Study on the Dynamic Stress Concentration Factor by the Three-Dimensional Boundary Element Method. Transactions of the JSME (Series A), Vol.55, No.514 (1989), pp.1400-1406 (in Japanese).
5) Tadaharu ADACHI, Hiroyuki MATSUMOTO, Sadayuki UJIHASHI: Analysis of Elastodynamic Problems by a Multiple Integral Transform Method Using a Fast Fourier Transform (1st Report, Basic Investigation). Transactions of the JSME (Series A), Vol.55, No.519 (1989), pp.2271-2276 (in Japanese).
INTERNATIONAL CONFERENCE
2) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: The Coupling Effect on the Impulsive Responses of a Circular Cylindrical Shell Subjected to Waterhammer Waves. Dynamic Fracture Mechanics For 1990’s (Ed. by H. Homma, D.A. Shockey, G. Yagawa), PVP-Vol.160 (1989), pp.143-149, The American Society of Mechanical Engineers.
1988
ORIGINAL PAPER
4) Hiroyuki MATSUMOTO, Tadaharu ADACHI, Yoshitaka KAKUHAMA, Kei-ichi FUKUZAWA: Analysis of the Dynamic Stress Concentration Factor by the Two-Dimensional Boundary Element Method．Transactions of the JSME (Series A), Vol.54, No.501 (1988), pp.1024-1029 (in Japanese).
INTERNATIONAL CONFERENCE
1′) Sadayuki UJIHASHI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: A Circular Plate Floating on a Fluid Subjected to Normal Impact by a Flying Object. Impact Loading and Dynamic Behavior of Materials (Ed. by C.Y. Cheim, H.-D. Kunze, L.W. Meyer), Vol.2 (1988), pp.913-919, Informationsgesellschaft Verlag.
1987
ORIGINAL PAPER
3) Tadaharu ADACHI, Hiroyuki MATSUMOTO, Sadayuki UJIHASHI: The Coupled Response of a Semi-Infinite Circular Cylindrical Shell Subjected to Waterhammer Waves. Transactions of the JSME (Series A), Vol.53, No.485 (1987), pp.84-90 (in Japanese).
INTERNATIONAL CONFERENCE
1) Sadayuki UJIHASHI, Tadaharu ADACHI, Hiroyuki MATSUMOTO: A Circular Plate Floating on a Fluid Subjected to Normal Impact by a Flying Object. Abstracts International Conference on Impact Loading and Dynamic Behavior of Materials >IMPACT’87<, (1987), pp.120.
1986
ORIGINAL PAPERS
1′) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Impulsive Response of a Finite Circular Cylindrical Shell Subjected to Waterhammer Waves. Bulletin of JSME, Vol.29, No.249 (1986), pp.737-742.
2) Sadayuki UJIHASHI, Tadaharu ADACHI, Hirotugu INOUE, Hiroyuki MATSUMOTO: An Analytical and Experimental Study of Impulsive Stresses in a Glass Plate Subjected to the Transverse Impact of Steel Balls. Transactions of the JSME (Series A), Vol.52, No.474 (1986), pp.525-532 (in Japanese).
1985
ORIGINAL PAPER
1) Tadaharu ADACHI, Sadayuki UJIHASHI, Hiroyuki MATSUMOTO: Impulsive Response of a Finite Circular Cylindrical Shell Subjected to Waterhammer Waves. Transactions of the JSME (Series A), Vol.51, No.467 (1985), pp.1886-1892 (in Japanese).